Fan Belt and the Light Switch the GTE
![](http://tomyang.net/wp-content/uploads/2020/04/4247_72.jpg)
I installed a belt on 250GTE eliminating the fan pulley.
![](http://tomyang.net/wp-content/uploads/2020/04/4247_75.jpg)
The belt driven fan had to me removed so there would be enough clearance for the modern electric fan to be installed behind the radiator. I tried my best to fit it in front, but there just wasn’t enough room.
![](http://tomyang.net/wp-content/uploads/2020/04/4247_73.jpg)
The shorter belt was found at the local parts store. I’m referencing it here so in case I do a search for “fan belt,” or “napa fan belt,” this blog post will hopefully show up in my search. I use this website as much as everyone else does for information!
![](http://tomyang.net/wp-content/uploads/2020/04/4247_74.jpg)
I found a working switch to replace the broken door switch on the white GTE, but my cover plate was ugly compared to the broken one, so I took it apart and swapped out the working internals.
NEXT
PREV