www.tomyang.net

I think I have found that the first picture is a receptacle for accessories as well. Aftermarket I am assuming.
This is a British made park light that went on the window.

Dave

Thanks guys, was this on the GTE as well or only the 330?

Dave

I seem to be able to only post one picture at a time
Dave

Hi, I hope someone can identify these 2 parts. They were in a box with some of my other dash parts. Not sure if there even for the GTE!
Thanks
Dave

Hi Martin, here is a photo of mine. Let me know if you need any other measurements.
Dave

Hi Martin, my car #2677 has the shorter 3 hole blind. It is off the car so I can measure anything you want.

Dave

Sorry Tom, I didn't see your post, I used Simichrome as I assumed the knobs were Bakelite. I will try polishing with some plastic polish and see if it is better.

Dave

Here is the before and after picture. Everything looked fine in the preview.

Here is the before and after pictures, the knobs were painted black and had white overspray! These are from the heater box doors. IMG_1362.JPG I mounted a M4 machine screw to my drill and used 600 grit sandpaper (wet) to remove the paint, then extra fine steel wool wetted with a drop of dish soap,fi...

Thanks Peterp, that is a very good link! Would be nice to know exactly what these knobs are made of.

Dave

Thanks for your input John. That is exactly why I am asking as one google suggestion was to use paint thinner and fine steel wool. These parts are far too expensive to experiment on...

Dave

Hi, can anyone tell me what the console knobs are made of for a 1961 GTE? Are they Bakelite?

Mine are covered in paint and I would like to get them cleaned and polished again.

Any suggestions on paint removal and polishing after?

Thanks

Dave #2677