www.tomyang.net

Bumper contacts the upper body cavity when the trunk is lifted up.....so i believe it would be obvious??

Does Verell still have these available ??

John, i tried many times to work with them thru the web site - they have some items i have needed badly in the past but could never get a response.

I have not tried to call - they do sell remanufactured dizzy units.....

Looking to find a good used one.....if possible

Looking for 1, used good core distributor - core or housing only will work

thanks in advance

does seem strange - i would get another test done at a different location, also like u said it worked before. that 113 is the higher amp alt, the 110 is the lower one for no ac cars, like the 330 GT or 330 GTC/GTS without ac. also - a good gnd is needed to get it to initiate charging. i would not th...

14 inch gtc car

Anyone have a spare tire hold down CUP available.

We have seem to have lost the one we sent out for polishing

Thanks in advance

Found one at Mostly British -

These guys surprise me from time to time with what they have.

I know at one time they had numerous 330 parts - obviously over the years selling off stuff, but stilll retain some hard to find items

Thank you David from Mostly British!

correction NEED Driver side - the pic is the pass side!!

looking for a complete assembly for the passenger side of the car - with a good heater core as well

let me know if you have anythings

There are lefts and rights - need the passenger side - so if you send me a pic

This is the driver side - need the opposite pls

from what i understand - early 330 GT series II cars had marchal headlamps......somewhat before 8289 (which is my car def had carello lamps) so the low 8000 is when the switch was. pics would help with your inventory.

motion products under Kiligimaro Parts

looks like it needs the engineering change - hard to tell from the picture, but i see a lighter color where it should be solid metal.

Looking for NOS red/Amber tail lamp lens -

Thank you!

yes agree, i usually install the grommets and fish the wire thru the grommet end first and with the silicon it slips thru pretty easy. ALSO
, i found to open up the holes slightly where there grommet fits into to give u a little more room.