Search found 29 matches
- Tue Dec 05, 2023 9:03 am
- Forum: Vintage Ferraris
- Topic: Weber DCZ6 Flat Spot
- Replies: 10
- Views: 5531
Re: Weber DCZ6 Flat Spot
Dyke, The mains are 1.30. I pulled them all and it is possible that 2 or 3 had a slight build up in them. I cleaned them and reinstalled. I could not unscrew the jets from their holders. I broke a small piece off at the screwdriver slot on 2 of them and stopped trying after that. I have not had a ch...
- Tue Nov 28, 2023 8:43 am
- Forum: Vintage Ferraris
- Topic: Weber DCZ6 Flat Spot
- Replies: 10
- Views: 5531
Re: Weber DCZ6 Flat Spot
Dyke, yes so much to check. John, it does do that occasionally. The car ran great, then it sat for a year or so and now it is having this problem. I don't think the carbs would have gotten out of synch or the linkage to have gotten out of whack from sitting. I am trying to figure out how to check th...
- Mon Nov 27, 2023 9:51 am
- Forum: Vintage Ferraris
- Topic: Weber DCZ6 Flat Spot
- Replies: 10
- Views: 5531
Re: Weber DCZ6 Flat Spot
Dyke,
I installed the 65 idle jets and I cannot tell a difference. The stumble is still there. It feels like it is running out of gas, but when you give it more throttle it pulls fine. Do you have any suggestions?
Terry
I installed the 65 idle jets and I cannot tell a difference. The stumble is still there. It feels like it is running out of gas, but when you give it more throttle it pulls fine. Do you have any suggestions?
Terry
- Tue Nov 07, 2023 11:28 am
- Forum: Vintage Ferraris
- Topic: Weber DCZ6 Flat Spot
- Replies: 10
- Views: 5531
Re: Weber DCZ6 Flat Spot
All of the idle jets appeared to be open. They are all marked 60.
- Mon Nov 06, 2023 9:28 am
- Forum: Vintage Ferraris
- Topic: Weber DCZ6 Flat Spot
- Replies: 10
- Views: 5531
Weber DCZ6 Flat Spot
I got the accelerator pumps working on my 330GTC and am now driving it. It has a stumble or flat spot when you accelerate from a steady speed. It is not a large stumble, just slight, and if you give it more gas it accelerates like it should. I am thinking something else is gummed up in the carbs. An...
- Mon Oct 30, 2023 10:06 am
- Forum: Vintage Ferraris
- Topic: Weber DCZ6 accelerator pumps
- Replies: 17
- Views: 8357
Re: Weber DCZ6 accelerator pumps
Success. Thanks so much Dyke. I would have never known about the tiny balls in the pump circuit. I have a workshop manual and old Weber drawings, but I would not have figured it out. Thanks. On one carb the piston part that you told me to feel up under the carb and work was frozen. I work it and use...
- Mon Oct 23, 2023 3:21 pm
- Forum: Vintage Ferraris
- Topic: Weber DCZ6 accelerator pumps
- Replies: 17
- Views: 8357
Re: Weber DCZ6 accelerator pumps
Dyke,
I am not, but I do use Sta-Bil Ethanol treatment. How much Marvel Mystery Oil do you use?
Terry
I am not, but I do use Sta-Bil Ethanol treatment. How much Marvel Mystery Oil do you use?
Terry
- Mon Oct 23, 2023 11:03 am
- Forum: Vintage Ferraris
- Topic: Weber DCZ6 accelerator pumps
- Replies: 17
- Views: 8357
Re: Weber DCZ6 accelerator pumps
Thanks Dyke. I will give it a try. I have never knowingly run anything except ethanol free gas, but I am taking the station's word for that.
- Mon Oct 23, 2023 9:35 am
- Forum: Vintage Ferraris
- Topic: Weber DCZ6 accelerator pumps
- Replies: 17
- Views: 8357
Weber DCZ6 accelerator pumps
I recently had my electric fuel pump rebuilt, and I have reinstalled it in my 330GTC #9411. My car has DCZ6 carbs. The pump runs and then slows as it has filled up the float bowls as it should. My problem is that when I pump the gas I am not getting any fuel sprayed into the carbs, and so the engine...
- Wed Sep 27, 2023 1:12 pm
- Forum: Vintage Ferraris
- Topic: 330GT SII dunlop caliper rebuild or replace
- Replies: 7
- Views: 8501
Re: 330GT SII dunlop caliper rebuild or replace
Tom,tyang wrote: ↑Thu Sep 07, 2023 8:04 pmMake sure they're stainless. I thought they use brass sleeves...michaelbalk330 wrote: ↑Thu Sep 07, 2023 7:55 pm Also
Apparently Apple Hydraulics can rebuild them ( one stop shopping) too but I need to find out about their CAD plating..
Michael
Tom
Who are you using for stainless sleeving?
Terry
- Wed Sep 06, 2023 12:54 pm
- Forum: Vintage Ferraris
- Topic: 330GTC radiator hoses
- Replies: 6
- Views: 9254
Re: 330GTC radiator hoses
Does anyone have any experience with Tom Vail's All Ferrari Parts?
- Thu Aug 24, 2023 7:27 am
- Forum: Vintage Ferraris
- Topic: 330GTC radiator hoses
- Replies: 6
- Views: 9254
Re: 330GTC radiator hoses
Thanks
- Sun Aug 20, 2023 12:58 pm
- Forum: Vintage Ferraris
- Topic: 330GTC radiator hoses
- Replies: 6
- Views: 9254
330GTC radiator hoses
Hi Tom,
I am having my radiator for my 330GTC #9411 rebuilt and was wondering if you had a suggestion of where to get new hoses?
Thanks,
Terry Phillips
I am having my radiator for my 330GTC #9411 rebuilt and was wondering if you had a suggestion of where to get new hoses?
Thanks,
Terry Phillips
- Fri Jun 30, 2023 7:50 am
- Forum: Vintage Ferraris
- Topic: 330GTC radiator
- Replies: 5
- Views: 6044
Re: 330GTC radiator
Thanks
- Thu Jun 29, 2023 11:22 am
- Forum: Vintage Ferraris
- Topic: 330GTC radiator
- Replies: 5
- Views: 6044
Re: 330GTC radiator
Yes. I realize this, which is why I am asking if anyone knows if this is what was done from the factory.