www.tomyang.net

I'll have a look at mine. The plastic end fell off of my driver's side handle. I was going to cast up a new set in alumilite.

http://www.caswellplating.com has a kit that allows you to locally remove plating using a piece of gauss dipped in electrolyte on a stick and a small wall transformer for a power supply.

Also good for locally adding/touching up chrome.

I remember the pliers being 180mm in my 330GT 2+2 kit. Same as my Daytona kit. The look ALLOT like these USAG pliers with the rubber handles pulled off. http://64.66.16.224/pliers-usag.jpg Here is a pic of the 365GTC toolkit from the carrbooks handbook. ( "The green book" ) http://64.66.16.224/365-t...

Better stock up then :)

When I first got my 330GT, it came with no tools. The jack it had was from a Mercedes ( i'll have to ask my mechanic what model ). It looks allot like the correct jack; but is about 6" longer. So, it doesn't fit in the tool roll. It could probably be cut down and painted light blue easily enough. Ev...

Here's a trick for the thin of wallet... Back on 11/6/02, Tom posted a pic of a generic lead hammer he found for about $20. I used this same hammer to fill out my toolkit. I stripped of the rubber handle, and applied a couple coats of grey and yellow paint. The results were not THAT bad... After a c...

lukek : [ What do you suppose this is worth? The bag can be had for $450, ... ] The bag is about right at $450.00 The wrenches are current "Beta 55" not the correct "Beta Auto 55" so they are good for about $60.00 US The carb key is less than $5.00 from www.piercemanifold.com The FACOM screwdrivers ...

Just saw a kit with a repro bag and repro tools for the 250/330 pop up on eBay. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=1872997418 Maybe a chance for someone to pick up a kit that at least looks right witout emptying the piggybank :) Looks like it is missing the jack, lead hamm...

but not the left one !. :)