Search found 859 matches

by Steve Meltzer
Sat May 18, 2019 5:25 pm
Forum: Vintage Ferraris
Topic: 330 gtc spare tire hold down
Replies: 2
Views: 79

Re: 330 gtc spare tire hold down

thanx Tom, i thought about welding it as well; it would give me the most expensive hold down on the planet. thanx steve
by Steve Meltzer
Sat May 18, 2019 1:06 am
Forum: Vintage Ferraris
Topic: 330 gtc spare tire hold down
Replies: 2
Views: 79

330 gtc spare tire hold down

Finally decided to get the correct spare tire hold down bolt for my GTC. Ordered from Mr. Fiat, but the one he sent is about 1" too short. Now, maybe he sent the wrong one, but I wanted to be certain my tub looks to be correct. Here's a picture and it shows two rubber-covered wedges that look to be ...
by Steve Meltzer
Tue May 07, 2019 2:20 pm
Forum: Vintage Ferraris
Topic: 330 gtc hood support bolts
Replies: 6
Views: 308

Re: 330 gtc hood support bolts

not only can it downloaded from the 'net, but if i weren't so ^&%^#^& lazy, i could've looked on my workbench and found it right there. thanx steve
by Steve Meltzer
Tue Apr 23, 2019 9:38 pm
Forum: Vintage Ferraris
Topic: Removing cam covers
Replies: 6
Views: 317

Re: Removing cam covers

Or the corollary: "when you're a hammer, everything in the world looks like a nail". Dyke, thanx for the laugh. s
by Steve Meltzer
Tue Apr 23, 2019 9:58 am
Forum: Vintage Ferraris
Topic: Removing cam covers
Replies: 6
Views: 317

Re: Removing cam covers

Tom, I'll have you know that my matching numbers cat Enzo, Houston SPCA registration #8995, was highly offended by your cruel comment about skinning his brethren. And, yes, sometimes you need to wear Nomex if you get into the mix on BaT. Who'd a thunk? s
by Steve Meltzer
Mon Apr 22, 2019 12:48 pm
Forum: Vintage Ferraris
Topic: Removing cam covers
Replies: 6
Views: 317

Removing cam covers

There was an interesting tidbit in the discussion of this 330GT S2 https://bringatrailer.com/listing/1966-ferrari-330-2/#comments. It involved removing the cam covers to set the valves. The poster uses a slide hammer and some safety wire after removing the decorative balls from the cover. I've done ...
by Steve Meltzer
Thu Apr 18, 2019 12:13 pm
Forum: Vintage Ferraris
Topic: 330 gtc hood support bolts
Replies: 6
Views: 308

Re: 330 gtc hood support bolts

thanx Peter....Kerry's work is a treasure...the bible for us. thanx agian.
by Steve Meltzer
Thu Apr 18, 2019 9:00 am
Forum: Vintage Ferraris
Topic: 330 gtc hood support bolts
Replies: 6
Views: 308

Re: 330 gtc hood support bolts

As always, thanx again. s
by Steve Meltzer
Mon Apr 15, 2019 1:06 am
Forum: Vintage Ferraris
Topic: 330 gtc hood support bolts
Replies: 6
Views: 308

330 gtc hood support bolts

what is the correct finish/color for the bolts that attach the hood hinges, springs, etc on a GTC? ditto the underside of the hood? black semi gloss? thanx. s
by Steve Meltzer
Mon Feb 18, 2019 2:15 pm
Forum: Vintage Ferraris
Topic: Tell me about the old days!
Replies: 14
Views: 1077

Re: Tell me about the old days!

Tom, thanx again for visiting us here in beautiful, downtown Houston (not!). Tho' depressed with recurrent leaks, the two biggies I set out to fix (chain case, rear main) are dry thus far. I worked on the left distributor housing leak and the tach drive leak, as well at the coolant leak at the heate...
by Steve Meltzer
Fri Nov 23, 2018 12:17 pm
Forum: Vintage Ferraris
Topic: here's info on air filters
Replies: 2
Views: 494

Re: here's info on air filters

Tom, you're right...i don't know that the GT cars use the same filters as the GTCs....ooops, me bad. But, at least on my GTC, those filters do work fine, fitting the internal clips and round abouts, so it is three singles, not one large, slinky filter like on my Daytonas. s
by Steve Meltzer
Thu Nov 22, 2018 11:00 pm
Forum: Vintage Ferraris
Topic: here's info on air filters
Replies: 2
Views: 494

here's info on air filters

As one might surmise, the air filters for a 330 GTC are like the GT cars:

Wix 42148 or Napa 2148

steve
by Steve Meltzer
Tue Nov 20, 2018 4:25 pm
Forum: Vintage Ferraris
Topic: Copiglia clamps
Replies: 5
Views: 907

Re: Copiglia clamps

Not sure why my pictures disappeared, maybe because I used some cheapo camera, but as Art knows, I"m happy to send the pictures to anyone who wants them. steve
by Steve Meltzer
Tue Nov 13, 2018 3:27 pm
Forum: Vintage Ferraris
Topic: Fixing holes in the glove box door
Replies: 10
Views: 1138

Re: Fixing holes in the glove box door

thanx again, Peter. s
by Steve Meltzer
Tue Nov 13, 2018 3:16 pm
Forum: Vintage Ferraris
Topic: Fixing holes in the glove box door
Replies: 10
Views: 1138

Re: Fixing holes in the glove box door

let me try to get to this in the next day or so. I'm really afraid to fool with mine, as "the enemy of good, is better". s