www.tomyang.net

I have just removed my front springs. I don't think that they have ever been out. I can e-mail pic. of the engraveing to who ever needs them. I have also made a spring compressor to get the springs out with the car apart. I have pictures of it and how it works.

E-mail shedworks@bellsouth.net

the small relay at the bottom with the green wire is for the dinamo light. If need pictures of other wiring the dash and wiring is very much exposed on my car now and it has and altenator.

The horse on older cars are chrome plated brass maybe 69 and older.

Not shore of the year but they switched to alum. with a brushed finish.

This copy is made of .110 thick stainless and will be offered polished or

with a brushed finish. It would take to chroming very well.

This is a copy of the emblem on the front of my 250 which is the original.

the one you are compareing it to is a flat vertion of the newer scalptured

emblem. I should Know I made it.

so, no input on the horse?

I think I put a switch out of a 1950 something chevy will have to check my notes.

A flat front cavallino emblem for sale. What do you think? good or bad?


http://ricambiamerica.com/product_info. ... 4e7f4b3664

I can't get mine apart so I took it out and put a tee in its place . I also have the vac. booster bypassed and I can still lock up all four wheels. My peedle is hard and you have to push harder but the car stops fin.

I bought new front and rear from GT car parts in AZ. they seemed to have the best price at the time. they seem to have alot of parts for 250GTEs and used parts also. Talk to Dave.

I have made silicone molds of parts before and it is a very good way to make a mold for a few parts but there is a slight chance of hurting the orginal part. Using the scan will give you the chance to do the changes you will need to do to get the inner parts you will have to adapt to the new cap. wi...

Did you find a cap or did you give up?

My car is very sensetive to oil level . but I would look at the gauge and then the relief valve.

can we get a pic of the inside of the cap and is the cap two parts maybe glued together at the line under the plug wires?

I was told by the person who will be doing the suface work that if you can scan the part with a ct scaner all he will need is a point cloud to then make the solid model.

The 3d scan I think gives the best results is a Atos scan this will take a series of degital pictures with registation points on the part. That file is then surfaced in a surfaceing CAD program and a 3d solid model is made.Form there you can make a rap-part useing SLA OR SLS . There are different ty...