www.tomyang.net

By the way we had to ho to flame thrower coils and a pertronix set up to get the car working smoothly without which she was just not working.

So if anyone is considering a switch to pertonix it’s highly recommended- makes the entire experience quite hassle free.

The car is on the road and the sheer thrill of the driving experience & the roar of the V 12 is insane! She misfires a bit when cold but after the engine gets properly hot the misfire more or less disappears. One thing I am unable to understand is that on this forum and in the literature I have read...

Still some niggling issues to sort out BUT
She is on the road!

Hi Tom Thanks for the response. The current issue is that Points become black . Cylinders 1,2,3 stop firing . We Remove the distributors , clean the points , set them and once again and we are fine. However after a while the issue returns. Similar issues on other cars got permanently fixed by moving...

Hello

Seeking your help guidance and advise on pertronix as per the message above.

Thanks

Hello from a sunny India The points have been troubling me and I Would like to replace them with Petronix for a permanent fix. I've found a supplier but he needs the distributor model number. The tag plate on my distributors is blank and there are no other markings on the distributor. My questions: ...

An update and a question. Firstly i hope all of you are doing well and safe from the virus. As you may have heard India has gone through a very rough time. A lot of time was spent last year and again this year in the lockdown . In the interim we managed to rebuild the entire suspension (including th...

Hi

A question for all the folks driving a vintage Ferrari in
California or other such warm climates.

Have you faced a problem of the coils overheating and consequently the car shutting down?

How does one fix this?

Thanks for the feedback

Could you give me a couple of names where i could get
The coil over update?

And what about the self levelling unit?

Once the coil over update installed just disconnect it?

Have started on the suspension rebuild.

A couple of questions

Are bolt in replacements available for the shocks or do we
Have to get them rebuilt?

Also the self levelling unit - who specialities in reliably
Rebuilding them?

Thanks

She’s on the road!!

Thank the Lord

And thank you guys.

Still many bridges to cross

But this was a major milestone!

Happy Thanksgiving!

And to mark this holiday

Well its stopped pouring but still heavily overcast. We’ve waited so many many years so we thought we may as well wait just a wee bit longer for the sun to come out. While we wait the thought is to start collecting parts required for a front and rear suspension job Based on the vast experience in th...

Thank you. Cleaned the plugs adjusted the idle mixture. Very little fuel rich smell now. However in the meantime the fuel gauge and temp Gauge stopped working. Since the monsoon has arrived in full force It’s raining very heavily- while we wait Getting the gauges fixed. Then as soon as we get a brea...

An update We spoke to Mike Pierce who pointed out what we were doing wrong. We were adjusting the idle using the screw On the lever that connects all three carbs. This was keeping the throttle plates open resulting in fuel pouring in. He asked us to keep this screw closed till it was only just touch...