Search found 1207 matches

by Rudy van Daalen Wetters
Wed Feb 18, 2004 4:53 pm
Forum: Vintage Ferraris
Topic: More sparkplug wires
Replies: 16
Views: 6014

Bluecat 49, This is what happened on my 250 GTE as well. It is important that the wire be stripped and folded back so as to make cantact with the tip of the screw. The screw in my distributor cap had arched so badly over the years that it did not have a sharp tip and missed the wiring in the cable a...
by Rudy van Daalen Wetters
Sat Feb 14, 2004 11:52 am
Forum: Vintage Ferraris
Topic: distributor machines
Replies: 21
Views: 6910

distributor machines

Thank you, "fest" and John Vardanian for your replies. John, the info on the Sun machine restorer would be most appreciated. The Ferrari Forum has been quite helpful in the short time that I have been a member.

Regards,

Rudy van Daalen Wetters
by Rudy van Daalen Wetters
Fri Feb 13, 2004 7:54 pm
Forum: Vintage Ferraris
Topic: distributor machines
Replies: 21
Views: 6910

distributor machines

My 250 gte s/n 4001 could use some ignition help and I am really trying to find a distributor machine to set the dual points in the distributor. Can anyone help me find such a machine? There have been a couple on e bay
but buyer beware if they work properly.

Thank you.

Rudy van Daalen Wetters
by Rudy van Daalen Wetters
Fri Feb 13, 2004 7:48 pm
Forum: Vintage Ferrari Archive
Topic: Door panel kick plate covers for 250 GTE
Replies: 78
Views: 49253

side kickplates

I noticed a posting from 330 America. I am missing ths side kickplates but were they on the 250 gte? I have no idea since my interior was redone and it has no side plates at present. If I should have them on my car I can split the cost with "330 America" I could not e-mail him direct for some reason...
by Rudy van Daalen Wetters
Tue Feb 03, 2004 12:08 pm
Forum: Vintage Ferraris
Topic: 330 Ameria s/n 5055
Replies: 12
Views: 3949

Woman buried in Lusso

The headlines should have read "Lussotania sinks again!"

Interesting thread.
by Rudy van Daalen Wetters
Mon Feb 02, 2004 1:05 pm
Forum: Vintage Ferraris
Topic: 250 GTE plug wires?
Replies: 28
Views: 10868

GTE spark plug wires

I recently replaced all the spark plug wires with Packard 440 wire. I soldered all the terminals, matched the correct lengths, routed everything as original and it looked great. Problem is, no fire on two cylinders. I ran a continuity test and soon found out that the pins in the cap were arched to a...
by Rudy van Daalen Wetters
Thu Jan 22, 2004 8:02 pm
Forum: Vintage Ferraris
Topic: GTE water temperature
Replies: 6
Views: 2588

GTE water temperature

I would like to get some feedback on a typical running water temperature
and oil temperature for the GTE.

Thanks,

Rudy van Daalen Wetters