www.tomyang.net

I ran across this Fiamm ad in a 1964 Italian car magazine. It shows contemporary photos of their batteries along with the Fiamm horn line including Roadmasters (commonly installed on Ferraris of that time). <a href="http://www.parrotbyte.com/330GTRegistry/images/FiammAd.jpg"> <img border="0" src="ht...

For those who are interested, the serial number of the car this body was attached to was 6477. You can read the history at: http://www.parrotbyte.com/330GTRegistry/?6477 with a little bit more on: http://www.barchetta.cc/english/All.Ferraris/Detail/6477GT.330.GT.htm It was interesting tracking this ...

Fest, I don't know quite what you do to get so many short lines when you post replies. Perhaps you type the Enter key when you get close to the end of the reply window. However, please just type. The words will wrap automatically at the right edge. Then use the Enter key only at the end of a paragra...

First, you need to have: Always allow BBCode: Yes Always allow HTML: Yes set in your profile. I bring up the picture from the website in a browser. Then copy the complete URL (including the http through the ...jpg). Note, the image doesn't need to appear in a web page. It just has to be stored in th...

The seller must have gotten an offer he couldn't refuse as the auction ended early because the seller no longer had the item for sale.

Regards, Kerry

This isn't a real good picture, but perhaps good enough. These gauges are on my Series II 330 GT, made during the same time as GTCs were. So I would expect that the gauges would be identical.



Regards, Kerry

It was bought through Algar Ferrari (who are also installing it). They handled the Italian end.

Regards, Kerry

Buddy gave me some particulars. It's being installed at Algar Ferrari. The whole console and dash had to come out. Probably some of the trim (for the trunk and interior light wiring) too. A big project. Buddy is also having some engine bay detailing done at the same time, but not much else. Yes, rep...

Here's a picture of Buddy's wiring harness:



Beautiful isn't it.

Regards, Kerry

From the 330 GT shop manual: The cylinder liners should never be removed from the cylinder block except for replacement. The cylinder liners are inserted press fit by heating the cylinder block to a temperature of 356°F (180°C). The top surface dimension of the liner, after the grinding operation sh...

For anybody that is missing the tubes that hold the spark plug wires on an outside plug engine, there's a set (with used caps and wires) on eBay: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=34205&item=2465224654 They say that they are for a 330 engine, but would probably fit an...

Hey Tom, I see that your workbench is done. There are two things that I would add: 1. Glue/screw a yardstick onto the front. It's amazing how many times you just need to measure something and there's no tape measure handy. 2. Get a plug strip that you can screw down and mount it vertically on one of...

I've been quite pleased with my Bend-Pak (http://www.bendpak.com/) 2 post asymetric lift. It's been in almost a year now with no problems at all.

Regards, Kerry

The FML that came today has the serial number as 7483.

http://cgi.ebay.com/ebaymotors/ws/eBayI ... 2462047183

Just spotted these. I don't have anything to do with the seller or auction.

Regards, Kerry