www.tomyang.net

Greetings... I fitted the same tires to the taxi earlier this year and am using 34psi as well. Seems to work well and feel better than the XWX's I replaced. The only problem is they look "modern". Tim

Greetings... ooopppss. I mis-stated my age when the big yellow taxi came to live with me. I was 27 (1976) and I have had it over half my life. (I'm starting to feel old. Time for a drive is something interesting) Tim

29 when I bought the big yellow taxi. I've now had it almost half my life. Tim(56)

Greetings.. It was great meeting those I was able to meet in my brief stay at the gathering. We had a dinner group of 18 in Pacific Grove ot get to. (The Whitehouse on Lighthouse Dr- highly recommended) The Quail was the best automotive event I've ever attended. Your ticket provided excellent and un...

Greetings... My friend Steve (275GTB and 575M0 and I have decided not to attend Concorso this year based on last years performance. We will attend The Quail instead. Another deciding factor was the cars themselves. When you consider last year there were a bunch of GTO's in attendance, I saw none at ...

Greetings.... I've bought brake seal kits from either JAE (www.jaeparts.com) or British Parts Northwest (http://www.bpnorthwest.com/)- don't remember which but I think it was BPNW. Fronts SP2556 - 2 1/8 inch. Fits 65 E type Jag. Rear SP2559 1 5/8 inch and fits some sort of Lancia. Brake pads-contact...

Greetings.... I checked with a friend who was involved with racing D types back then and this was his response..... You might try some of the "D" Type and Ferrari specialists such as Nigel Dawes or Duncan Hamilton &Co. (011 441256 765000). An alternative in the States is Tivvy Shenton in Richmond, V...

Greetings.... Seems we lovers of old Ferraris have made the big time. Check out this article in the New York Times. It does require you sign up but it seems to be farily spamless. http://www.nytimes.com/2005/04/29/autom ... rrari.html
Tim

Greetings.. I brazed a slightly larger washer under the head of the center bolt. This created a receiver for an o-ring. It has survived several undoings and doings without problems. If I remeber the original correctly it was and aluminum crush washer good for one use only. The bolt couldn't be remov...

Greetings... Tom, did you get a copy of the wiring diagram from Joe Curto? I currently have a jury-rigged setup with the motor from my SP250 (Daimler-not Ferrari). Tim

Greetings.. Sometime back, I bought one of the big cast bronze sockets for my knockoffs. Haven't been able to find one since. Any idea who is selling them now? Tim

Greetings... Welcome to the world of British electrics. Take a look at http://www.vtr.org/maintain/wiper-motor/ for a excellent article on the wiper motors. Tim

Greetings... Here in Callifornia, we have something called RFG or Reformulated Gasoline. It got a lot of bad press amongst the collector car guys. Made their cars leak. I read an SAE paper on this as I was concerned about the yellow lines in my car. These lines have been in place for about 20 years....

Greetings... Jimmy, you've had British cars, haven't you. I learned that one on my MG TF. I replaced the Fispa cllicker pump with a Mallory rotary vane pump with built in regulator. tim

Greetings... Has anyone had experience with replating Cheney clamps? I have enough to do my car but they all are a bitty scruffy (sort of like my car). tim