Search found 255 matches

by whturner
Sun Aug 03, 2008 4:25 pm
Forum: Vintage Ferraris
Topic: Spark plugs differ by bank?
Replies: 30
Views: 20124

Wrong plug is the reason. BP6ES should not be used. The reason the second washer is on is to give clearance for the projected tip which typically fouls the inner head at the base and closes the electrodes. Result is no spark. Someone was monkeying around to make the BP6ES plugs work. Use B6ES and y...
by whturner
Wed Jul 23, 2008 10:52 am
Forum: Vintage Ferraris
Topic: Help me understand dual points?
Replies: 15
Views: 11083

Hi John: No apology needed - it is often appropriate to start a discription from the basics, especially when the audience has an uncertain background. I often start a presentation with such a "review". In thinking about the Ferrari ignition, it appears to me that a 3 lobe distributor cam, coupled wi...
by whturner
Tue Jul 22, 2008 11:06 pm
Forum: Vintage Ferraris
Topic: Help me understand dual points?
Replies: 15
Views: 11083

Hi John: I did use "fire" in a casual sense, like a rifle fires by pulling the trigger. But I was wondering about the ststement that one set "fires" 3 plugs, and the other "fires" the other 3. I couldn't see how that could be true, but I have seen that several times. Of course there were in the past...
by whturner
Tue Jul 22, 2008 2:15 pm
Forum: Vintage Ferraris
Topic: Help me understand dual points?
Replies: 15
Views: 11083

Tom, I seem to recall Detomaso/Pantera using a dual point arrangment that did just that, dual points with an open overlap (to increase dwell and coild energy_... I wasn't sure if ours were the same because it doesn't look like the cam would provide that type of movement? Thanks Richard, for clarify...
by whturner
Tue Jul 22, 2008 12:18 pm
Forum: Vintage Ferraris
Topic: Pittsburgh Vintage Grand Prix
Replies: 0
Views: 3919

Pittsburgh Vintage Grand Prix

Report from the Field: I attended the event as just another Italian car, rather than joining the formal gathering(s) a bunch of the east coast guys set up. The first day is the car show (grouped by nationality but not model or year), while the racers are practicing for the competition the next day. ...
by whturner
Sat Jun 21, 2008 12:30 pm
Forum: Vintage Ferraris
Topic: Tires
Replies: 37
Views: 33956

Hi Yale: I had to look at the "Specs" listed for a tire rather than the nominal size to make any comparison. The current 215/(HR/VR)65 catagory by many makers seem to be the closest to the original XWX dimensions. As listed by Coker, the XWX 205/70 was 26.5 in diameter, 8.3 in section width. I ended...
by whturner
Fri Jun 20, 2008 10:48 pm
Forum: Vintage Ferraris
Topic: Tires
Replies: 37
Views: 33956

Hi MIke:

Ran across a test of the modern XWX's on the following Mangusta site: He loves them.

http://www.mangustainternational.com/te ... .php?id=43

Also, I can personally vouch for his comments about the Avon tire which I have on my car - temporarily.

Cheers
Warren
by whturner
Fri Jun 20, 2008 8:15 pm
Forum: Vintage Ferraris
Topic: Kicking some ideas around for the Fall Party.
Replies: 29
Views: 19346

First off, you're going to need narrower shoes! Tom Why? Warren The GTE pedals, along with a lot of Ferraris, are very close, so running shoes are often not a good choice. Tom A serious question - are the GTE pedals even closer than the330 pedals? Even with narrow Pumas I have found it convenient t...
by whturner
Fri Jun 20, 2008 12:42 am
Forum: Vintage Ferraris
Topic: Kicking some ideas around for the Fall Party.
Replies: 29
Views: 19346

tyang wrote:First off, you're going to need narrower shoes!

Tom
Why?

Warren
by whturner
Thu Jun 19, 2008 10:30 pm
Forum: Vintage Ferraris
Topic: U Joint Greese Tool
Replies: 5
Views: 4462

Grease Fittings.

Hi William Mine has the slotted screws, but I have a nozzle with a rubber cone on the end and works quite well. You just hold it into the hole with a little pressure and inject grease to your hearts content. If you have a nonstandard zerk fitting, there a nozzles which adjust to the different sizes....
by whturner
Tue Jun 10, 2008 11:10 pm
Forum: Vintage Ferraris
Topic: Rear end seals
Replies: 28
Views: 18036

Hi Tom: Speaking from long experience in viscous flow, a different viscosity will change the rate of flow, not stop or start it! Other factors like compatibility with the seal material can eventually cause a leak, as well as the obvious possibilities of bad seals or installation. In my case, soon af...
by whturner
Tue Jun 10, 2008 2:02 pm
Forum: Vintage Ferraris
Topic: Rear end seals
Replies: 28
Views: 18036

Re: thoughts on axle oil

250 weight oil is not so common in rural Ontario - and I see in these posts, folks using other weights. Can one use SAE85/95 in the rear axle of a 330? Did Ferrari use the 250 because they assumed you would drive at 145 mph all day, and the oil would be 220F? Drive it or it dies (as I eagerly await...
by whturner
Tue Jun 03, 2008 12:35 pm
Forum: Vintage Ferraris
Topic: Rear end seals
Replies: 28
Views: 18036

Re: Rear end seals

I replaced my rear end seals with new ones from the Algar about ten years ago and in spite of the fact that I have put virtually no miles on the car they are now leaking again. One fellow said that you need to use the 250w gear lube and they won't leak. Anybody have an opinion about that? Tom W Hi ...
by whturner
Sat May 31, 2008 11:48 pm
Forum: Vintage Ferraris
Topic: Kicking some ideas around for the Fall Party.
Replies: 29
Views: 19346

Art S. wrote:Oh come on Warren,

Those Avons will be fun in the snow!

Regards,

Art S.
Yeah - fun in the snow drift in the ditch along side of the road.

Cheers
Warren
by whturner
Fri May 30, 2008 11:51 pm
Forum: Vintage Ferraris
Topic: Kicking some ideas around for the Fall Party.
Replies: 29
Views: 19346

Hi Tom, The first fall gathering was Oct 21 or Oct 23, the weather was great and so was the leaf color. Assuming my car gets done, I plan to attend. Regards, Art S. Hey Art: Weather was great? Speak for yourself - Judy and I drove over the mountains in snow, sleet, and rain on the way back. I vote ...