www.tomyang.net

I would be interested in the extra parts .

Email me at Lockeauto@gmail.com

Rob

Thanks for the information . After extensive searching the only major part I need at this time is the smaller headlight bucket . A couple of the retaining rings need re chroming also. The parts I have could use some of the adjusters replaced and a few new springs . I will check some other European c...

Hello all, I am missing some headlight parts for my 1964 330gt series 2 . I have the housings but am missing a large and small bucket and the headlight retaining rings. I would also like to replace the springs and small adjuster parts. Is the any other cars that share these headlight parts ? Thanks ...

I am leaning towards Marrone after several months of thinking about it. Next is to do some test panels, then I can have a better idea. Michael thank you for your offer and if I have any reason to travel your way I would like to come by. Mike do you think I can get the paint code from McQueen’s Lusso...

I found the missing springs in a small bag
And reproduced them by using metal banding
Straps cut to the lengths I needed .
Worked perfect.

Series one is different , there was only one series one car at Cavallino this year and he could not open his hood
so for me to see it .

I believe it is flat bar spring stock looking .

I appreciate it Kerry.

Rob

Hello all , I noticed that the metal tab spring that is mounted to the inside rear corners of my hood on my 1964 330gt is missing on both my cars . I have searched for a good picture of one on the net but that corner is always cut off in any pictures of these cars . I think they can be replicated if...

http://tomyang.net/cars/phpBB3/download/file.php?mode=view&id=3912 Hi Tom , thanks again for giving me the opportunity to take your car for a ride. It was very kind of you to let me experience driving my first vintage Ferrari even though I own 2 of them. It has been a long road to get them done and ...

We are just leaving for the FCA national meet , hopefully a Marrone car will be there. Thank you for all the input and I may have to take a ride to NYC . I will be taking my 550 Maranello in Titanium gray if anybody see's me please stop and talk. I will also be helping out with the CBM at the end of...

If it does fit my 1964 330gt I woud interested in buying it . You can contact me faster at
Lockeauto@gmail.com

Rob

Hello everyone , sorry it has been a while and we can blame that my daughters wedding ($$) . My 1964 330GT series 1 #5393 has been in primer and some of the bodywork has been done but still a way left to go. I have to start thinking about paint , specifically what color . The car came originally Mar...

Pinion seal is a 42x72x8
Pinion bearing : NTN 4T-HM89449 and 4T-M88046

These were in my diff before I disassembled it . Not sure about axle bearings , I did not remove them.

Rob

Are the 330GT rear differentials the same ? I have mine apart and I could get the bearings and seals from a local supplier from the numbers on the end of the bearings that were on it. I cant check for a coupe of days but I will post the NTN bearing number . I purchased my differential used but it lo...

I have a complete extra interior for a 330gt , I don't think there is much of a market for it ?

Thanks , those pictures are great . We will start with the soon.

I also realized that I can make the washers with a hole saw bit I have with near perfect dimensions to the old ones. We have
a plastic supplier close to me that should have some 1/4 in thick plastic I can buy .

Thanks