Search found 1207 matches
- Wed Feb 18, 2004 4:53 pm
- Forum: Vintage Ferraris
- Topic: More sparkplug wires
- Replies: 16
- Views: 14062
Bluecat 49, This is what happened on my 250 GTE as well. It is important that the wire be stripped and folded back so as to make cantact with the tip of the screw. The screw in my distributor cap had arched so badly over the years that it did not have a sharp tip and missed the wiring in the cable a...
- Sat Feb 14, 2004 11:52 am
- Forum: Vintage Ferraris
- Topic: distributor machines
- Replies: 21
- Views: 17216
distributor machines
Thank you, "fest" and John Vardanian for your replies. John, the info on the Sun machine restorer would be most appreciated. The Ferrari Forum has been quite helpful in the short time that I have been a member.
Regards,
Rudy van Daalen Wetters
Regards,
Rudy van Daalen Wetters
- Fri Feb 13, 2004 7:54 pm
- Forum: Vintage Ferraris
- Topic: distributor machines
- Replies: 21
- Views: 17216
distributor machines
My 250 gte s/n 4001 could use some ignition help and I am really trying to find a distributor machine to set the dual points in the distributor. Can anyone help me find such a machine? There have been a couple on e bay
but buyer beware if they work properly.
Thank you.
Rudy van Daalen Wetters
but buyer beware if they work properly.
Thank you.
Rudy van Daalen Wetters
- Fri Feb 13, 2004 7:48 pm
- Forum: Vintage Ferrari Archive
- Topic: Door panel kick plate covers for 250 GTE
- Replies: 78
- Views: 224192
side kickplates
I noticed a posting from 330 America. I am missing ths side kickplates but were they on the 250 gte? I have no idea since my interior was redone and it has no side plates at present. If I should have them on my car I can split the cost with "330 America" I could not e-mail him direct for some reason...
- Tue Feb 03, 2004 12:08 pm
- Forum: Vintage Ferraris
- Topic: 330 Ameria s/n 5055
- Replies: 12
- Views: 9887
Woman buried in Lusso
The headlines should have read "Lussotania sinks again!"
Interesting thread.
Interesting thread.
- Mon Feb 02, 2004 1:05 pm
- Forum: Vintage Ferraris
- Topic: 250 GTE plug wires?
- Replies: 28
- Views: 24898
GTE spark plug wires
I recently replaced all the spark plug wires with Packard 440 wire. I soldered all the terminals, matched the correct lengths, routed everything as original and it looked great. Problem is, no fire on two cylinders. I ran a continuity test and soon found out that the pins in the cap were arched to a...
- Thu Jan 22, 2004 8:02 pm
- Forum: Vintage Ferraris
- Topic: GTE water temperature
- Replies: 6
- Views: 6274
GTE water temperature
I would like to get some feedback on a typical running water temperature
and oil temperature for the GTE.
Thanks,
Rudy van Daalen Wetters
and oil temperature for the GTE.
Thanks,
Rudy van Daalen Wetters