www.tomyang.net

Guess who just called. HIs number is now blocked.

Greetings... These are available from your local British parts dealer. They fit Triumph TR3 and TR4. Will need a bit of modification.

https://api.split.bosal.accounts.intrac ... 250438.PNG

Greetings.... And if I submitted my car for judging I would wind up owing points.

Tim

Greetings... Jimmy, if only that were true. A friend had a very nice 275GTB. All work done by very knowledgeable and respected shops. His goal was to get the car to platinum (and then drive it till it was tin). He has done just what you suggest, take the scoring sheet and had the "offenses" correcte...

Greetings... I had exactly the same problem on my 330GT with the Bonaldi master cylinder. I consulted a local brake expert, been in the business forever, and without hesitation he told me what the problem was and what the fix was. The master cylinder wasn't returning far enough to open the transfer ...

Greetings... It does look different from mine. The arm and the fitting on the end of the cable are different and on mine, the hoses come off parallel to each other. Basic design looks very similar though

Tim

Greetings... What I see is not a thermostat but a heater control valve. Not sure if that is correct for your GTE but it is what is used on the 330GT.

Tim

Greetings... Complete Auto Electric have one listed on eBay. They are in Van Nuys Ca. Company has a spotty reputation so I would have anything from them tested. They list as BNR. My 64 330 GT has a Marelli. You sure it calls for Lucas

Tim

Greetings.. I thought I already did.

Tim

Greetings... You are using E85? That's 85% ethanol. Unless you've done some real serious re-working of your carbs, your car will run poorly or not at all. If you are using E10, the stuff at the vast majority of stations it like running your car 5% lean but it will work. If you are using your auxilia...

Greetings.. Some time ago I bought a kit with bands, clamps, and cotter pins from AuthenticClassics , a Mercedes restoration supplier. It came with both sizes and was the most reasonable price I found. Don't remember the application or part number but I think John V bought some as well and perhaps h...

Greetings... I replaced the gauge lights in one of my Morgans with LEDs and it was a big improvement. The light is cooler (whiter) and seems to improve the contrast. Gauges much easier to read.

Tim

Greetings... Some time ago, Cory posted a picture of the one from Big Brother. It was a single motor with a 3 blade cast aluminum fan. Little brother (my car) has no fan but I suspect it should have one. There are holes in the square tube that suggest there had been one. That skinny little blade in ...

Greetings... Mine measure 2.5 inches just below the flange below the cap. The picture shows the mounting bracket quite well. The second mounting hole is just below and forward of the one you can see in the picture. This is on car 5769, a fairly early S1.

Tim

Greetings... The wheel boxes come through the body work at different angles depending the angle of the windscreen. On my Turner with a very flat and upright windscreen, they are at a very flat angle-closer to horizontal. The Morgans have them at a bit more upright angle and my Ferrari has them at an...