Search found 107 matches
- Mon Oct 19, 2015 5:38 pm
- Forum: Vintage Ferraris
- Topic: DINO Ignition Issue
- Replies: 3
- Views: 4314
Re: DINO Ignition Issue
I would also check the Ohms on the plug wires. I had a similar situation on a carbed Boxer recently and it was the 20+ year old wires
- Mon Oct 19, 2015 12:16 pm
- Forum: Vintage Ferraris
- Topic: DINO Ignition Issue
- Replies: 3
- Views: 4314
Re: DINO Ignition Issue
Michael, If I remember correctly, there is a section in the operating manula that shows how to bypass the Dinoplex in the trunk. You move around a couple of wires. It is very simple to do. I did it on my coupe when I owned it. If it runs its probably your Dinoplex. But as I remember these things the...
- Fri Oct 02, 2015 4:46 pm
- Forum: Vintage Ferraris
- Topic: Bleeding the brakes on a Daytona
- Replies: 15
- Views: 12125
Re: Bleeding the brakes on a Daytona
Done it in a similar manner many times. Don't know whats' up except maybe one of the unions that direct brake fluid to the rear may have gotten clogged - but looks like both sides would have to be clogged to get nothing out of either. Someone smarter than me will have to help.
Good Luck,
Drew
Good Luck,
Drew
- Thu Jul 16, 2015 4:38 pm
- Forum: Vintage Ferraris
- Topic: Accelerator pedal replacement for GTC
- Replies: 3
- Views: 3360
Re: Accelerator pedal replacement for GTC
Tom, thanks for posting.
I had never heard of mrfiat.
What a good site for parts especially rubber trim.
Appreciate,
Drew
I had never heard of mrfiat.
What a good site for parts especially rubber trim.
Appreciate,
Drew
- Tue Apr 21, 2015 11:08 am
- Forum: Vintage Ferraris
- Topic: Stuck Boxer Clutch
- Replies: 9
- Views: 6909
Re: Stuck Boxer Clutch
Thanks for all the suggestions. I think what I am going to do is cut a 2x4 to hold the clutch in, put the rear tires in the air on jack stands, star the car in first gear, get it warmed up then see if between the combination of break and throttle I can break it free. If that does not do it then put ...
- Mon Apr 20, 2015 3:01 pm
- Forum: Vintage Ferraris
- Topic: Stuck Boxer Clutch
- Replies: 9
- Views: 6909
Re: Stuck Boxer Clutch
Thanks guys, Yes it bumps forward when I have it in second with clutch engauged. I can start it in neutral; just will not go into gear as Dyke said when running and clutch engauged. Had not thought to try to start in first on the street but sounds like next step. will get it warmed up and give it a ...
- Mon Apr 20, 2015 9:56 am
- Forum: Vintage Ferraris
- Topic: Stuck Boxer Clutch
- Replies: 9
- Views: 6909
Stuck Boxer Clutch
Just got my carbed Boxer together after an engine out service and the clutch is stuck to the flywheel. It probably sat for 6 months while I redid the dash then did the engine out. I manually confirmed the lever is actuating. Tried putting the car in 2nd with clutch engauged and and bumping the start...
- Mon Jan 12, 2015 5:04 pm
- Forum: Vintage Ferraris
- Topic: Boxer Engine Removal
- Replies: 19
- Views: 16059
Re: Boxer Engine Removal
Finally got the engine out of the Boxer this weekend thanks to Tom and SimonC's help. Not too bad but lots of time and work - its just a big job.
Now its time to make her bela again.
Drew
Now its time to make her bela again.
Drew
- Mon Oct 20, 2014 10:30 am
- Forum: Vintage Ferraris
- Topic: Daytona Driveability Problem
- Replies: 52
- Views: 39827
Re: Daytona Driveability Problem
I have a euro Daytona and have not had that issue. I owned a USA car previously and do not remember the car bogging down when starting off.
I would think it has to be something in the carb circuit. Even something like a partially fouled emulsion tube. What a pain. Good luck.
Drew
I would think it has to be something in the carb circuit. Even something like a partially fouled emulsion tube. What a pain. Good luck.
Drew
- Sat Oct 11, 2014 2:59 pm
- Forum: Vintage Ferraris
- Topic: Boxer Engine Removal
- Replies: 19
- Views: 16059
Re: Boxer Engine Removal
Thanks Tom. I get the process. Just mentally going thru the steps. Trying to decide if its worth removing the clutch/transfer gear pack as you did or just loosen the compressor and lower it like it looks SimonC did. The compressor bolts we are talking about being hard to get to. Those are the ones t...
- Sat Oct 11, 2014 2:59 pm
- Forum: Vintage Ferraris
- Topic: Boxer Engine Removal
- Replies: 19
- Views: 16059
Re: Boxer Engine Removal
Thanks Tom. I get the process. Just mentally going thru the steps. Trying to decide if its worth removing the clutch/transfer gear pack as you did or just loosen the compressor and lower it like it looks SimonC did. The compressor bolts we are talking about being hard to get to. Those are the ones t...
- Fri Oct 10, 2014 2:05 pm
- Forum: Vintage Ferraris
- Topic: Boxer Engine Removal
- Replies: 19
- Views: 16059
Re: Boxer Engine Removal
Simonc,
Are you saying that after disconnecting the AC hoses, you can loosen the AC compressor bolts so that the compressor sits maybe an inch or so lower and have enough room to remove the engine?
Thanks,
Drew
Are you saying that after disconnecting the AC hoses, you can loosen the AC compressor bolts so that the compressor sits maybe an inch or so lower and have enough room to remove the engine?
Thanks,
Drew
- Tue Sep 09, 2014 6:52 pm
- Forum: Vintage Ferraris
- Topic: Boxer Engine Removal
- Replies: 19
- Views: 16059
Re: Boxer Engine Removal
Thanks guys. I plan on using the 4 post lift just to disconnect all the stuff that is easier to get to under the car. Then I am going to roll it off the lift and use a cherry picker similar to the pic Simonc posted. Its a friend's cherry picker and I appreciate the comments about getting the engine ...
- Mon Sep 08, 2014 10:29 am
- Forum: Vintage Ferraris
- Topic: Boxer Engine Removal
- Replies: 19
- Views: 16059
Re: Boxer Engine Removal
Appreciate the comments. I replaced the lines that deliver and return fuel to the car a couple of years ago. Never thought about replacing the line between the tank or the one that fills the tank. Good thought. I have a 4 post lift that should help. But this job looks like one that you just take you...
- Sun Sep 07, 2014 3:02 pm
- Forum: Vintage Ferraris
- Topic: Boxer Engine Removal
- Replies: 19
- Views: 16059
Boxer Engine Removal
Tom, or for that matter anyone who has done this before. Was glad to see your diary on Boxer engine removal. I am getting ready to do this this fall. I have a carbed 512. Couple of questions: How are the engine mount bolts removed - from bottom of car? Assume you remove the large bolds down the midd...