www.tomyang.net

Thank you very much for the information, I will try to get them from UFI directly as I live in Europe. I sent them an email, let´s see if they response.

regards,

Martin

Hello Tom,

thank you for your excellent memory Cn you please provide a contact email from Francois? I am interested in purchasing the part.

Hello, Searching the internet and this forum I found some information about the housing of the rear fuel filter but nothing about the filter element itself. Can anyone advise about supplier and parts number? Is it a Fispa cartridge and are these still available? Any information appreciated - thank y...

Aha, the reason with the external supplier of the component sounds very logical. So I will leave them as is and not replace them with button style. One more time thank you very much for the information John!

regards
Martin

Thank you very much for this precise information and the helpful instruction for installation!

regards,

Martin

Wow, that looks awkward! Thank you anyhow for the information with the bulps, I will be careful when changing them. Mine is only broken into two parts, the crack is relatively unvisible but it needs replacement definately. As I said, I am with one piece, hopefully Yolanda can make a good mold with T...

Hello, My GTE shows grease nipples with flat top made of brass throughout. Only at the two nipples at the cardan joint are different (the one right beside at the prop shaft looks like all others on the car again). I assume that these two have been fitted later somewhen and by lacking the right style...

Hello, I changed all existing rubber parts from my 250 GTE front suspension and then this came to my intention: there is a whole where I think that a rubber should absorb the shocks from the upper part. When I had a look in the parts list I found #16305423 - rectangular upper pad front suspension . ...

Hello Tom, thank you for checking it out - I am definately in with one piece which is in any case worth a try. I will email Yolanda directly and hope that you bring your good piece as soon as possible to her to produce a good mold. Thank you very much for your help and your report about the quality ...

Just to inform that no one goes the same wrong road: the rubber gaskets for the front indicator lights purchased from cicognaniguarnizioni.it are wrong. The outer diameter is only 55mm wheras the 250 GTE requires 60mm. Little difference with big effect as the smaller Alfa gaskets do not fit my car :...

Thank you Terry, just send an email to Yolanda. Will inform asap when receiving an answer.

Hello Terry, I live in Austria/Europe, do not know how far that is away but I would like to give it a chance before taking the exit to 3D printing. Please let me know what CA means - is it Canada? What is the telefon number including the international pre dial of the source in El Segundo? Other than...

Hi,

The glass of my top light is broken and I look for replacement - does anybody know where to get one?

regards, Martin

Ja, thank you for sharing the experioence with the welding-solution, I also thought about this way as the "emergency exit". Anyhow I would like to get a spare part for replacement if somehow possible. I do not hesitate to invest the work on the broken part but think that the welded surface might not...

Hi, I have problems with my window mechanism. One tooth of the cogwheel with the crank handle sleeve is missing and the window does not slide within the lead when beeing closed. I think the two side slieve gaskets need to be replaced and the nylon bush as well - see pics. Does anybody have these par...