Would anyone out there be able to advise the approx diameter of the brake fluid reservoirs on a 330 MK 1? There are a couple of options available ( a Fiat one and one used on Alfas of the same era) and I'm trying to get a correct match.
Also if anyone has any ideas on mounting brackets etc for the reservoirs, that would help too!
Cheers
Andrew
330 MK1 brake reservoir
330 MK1 brake reservoir
Kelly La Velle & Andrew Stevens
Re: 330 MK1 brake reservoir
Hi Andrew,
I don't have a SI 330 at my shop right now, but here are some pictures of the brackets.
Tom
I don't have a SI 330 at my shop right now, but here are some pictures of the brackets.
Tom
- Attachments
-
- 5749_86.jpg (364.12 KiB) Viewed 6586 times
'63 330 America #5053
Re: 330 MK1 brake reservoir
Greetings... Mine measure 2.5 inches just below the flange below the cap. The picture shows the mounting bracket quite well. The second mounting hole is just below and forward of the one you can see in the picture. This is on car 5769, a fairly early S1.
Tim
Tim
1964 330GT 5769 -the big yellow taxi 61&66 Morgan +4's Daimler SP250 Turner 950S and some other dull stuff plus a brand Mercedes C300 4matic
-
- Posts: 1908
- Joined: Wed Sep 04, 2002 12:13 am
- Location: San Francisco Area
Re: 330 MK1 brake reservoir
Andrew, Mr. Fiat sells these for about $40. It will work fine on the Ferraris, but be warned that the plastic is noticeably thinner than those that came with your car.
john
john
PF Coupe
Re: 330 MK1 brake reservoir
For some reason, the last post was only allowing me to post one picture. Let's try that again.
Tom'63 330 America #5053
Re: 330 MK1 brake reservoir
OK - similar to Alfa ones of the same era, but not exactly the same... That's probably what Mr Fiat sells I guess. Deal with him occasionally, so will check!
Cheers
Cheers
Kelly La Velle & Andrew Stevens