searching for 330 heads

Moderators: 330GT, abrent

Post Reply
atlantaman
Posts: 3
Joined: Tue Feb 18, 2003 1:51 am
Location: Atlanta, GA

searching for 330 heads

Post by atlantaman » Tue Feb 18, 2003 1:58 am

Several years ago the heads from my 330 were stolen --I have been able to find 1 for the drivers side but still need the other--please let me know if anyone knows where one may be found.

El Wayne
Posts: 75
Joined: Tue Sep 03, 2002 7:44 pm
Location: So Cal

Post by El Wayne » Tue Feb 18, 2003 2:24 am

A few years ago? Who have you checked with since then? You might want to try Tom Shaugnessy at gt40mirage@aol.com or check this link: http://www.vintageferrariparts.com/inde ... ge=contact.

Ruedi
Posts: 50
Joined: Wed Jan 15, 2003 4:02 am

Post by Ruedi » Tue Feb 18, 2003 4:18 am

FYI: The link (URL) in Wayne's post only works when the period at the end is removed, i.e.: http://www.vintageferrariparts.com/inde ... ge=contact

El Wayne
Posts: 75
Joined: Tue Sep 03, 2002 7:44 pm
Location: So Cal

Post by El Wayne » Tue Feb 18, 2003 6:39 am

Thanks, Ruedi. That period was supposed to be the end of my sentence. I didn't realize it would make itself part of the link!

atlantaman
Posts: 3
Joined: Tue Feb 18, 2003 1:51 am
Location: Atlanta, GA

reply

Post by atlantaman » Wed Feb 19, 2003 12:43 am

I have found Tom to be about 2x the cost of Ted Rutland--

atlantaman
Posts: 3
Joined: Tue Feb 18, 2003 1:51 am
Location: Atlanta, GA

reply

Post by atlantaman » Wed Feb 19, 2003 12:47 am

I purchased one head recently for 2400--with fresh rebuild, new valves guides and seats---Tom quoted me 4k about a year ago and Keith in England wanted 5k---however i did miss out on a set on e-bay for 800 about 6 months ago.

User avatar
Terry Gardiner
Posts: 39
Joined: Sat Sep 21, 2002 12:06 am
Location: Staffordshire, England
Contact:

Post by Terry Gardiner » Fri Feb 28, 2003 9:57 pm

You could also try:
Garage Piet Roelofs B.V.
Arnhemsestraatweg 271
6991 JG Rheden
Netherlands
Tel: 026-4951551
Fax: 026-4955025
When I visited his workshop a couple of years ago Piet was remanufacturing blocks and heads - the ones I saw were for 250 though.
Terry Gardiner

Post Reply