Does anyone know how many of each clamp go into a GT/E.
The big "2A" only appears on radiator hose/thermostat, so there are 4 of these.
Others I have found on my car are "087S", "0" and "1", how many of each should I have?
Does anyone have one or two "2A" they could sell? Prefer ones that look worn as the car has lots of patina. One of mine has given up and another is almost rusted through...
Cheney clamps again...
Cheney clamps again...
250 GT 2+2 3197/GT
Kare, I may have a few "2" available, but not "2A" If interested, let me know. These are NOS and unplated.
Jon Brent put this list together some time ago:
2 large, 94705, fuel filler neck hose
2 medium, 94100, water pump inlet hose
2 medium, 94103, radiator top outlet hose
2 medium, 35x41, cam vent filter assembly to casting
2 small or medium, 22x38, cam vent filter assembly to vent tube
2 small, 94101, carb vacuum hose to brake booster
2 small, 94909, heater core returns to water pump inlet hose
2 small, 94909, heater core central shutoff valve hose
2 small, 94909, heater core manual shutoff valve hose
Best regards,
Ron
Jon Brent put this list together some time ago:
2 large, 94705, fuel filler neck hose
2 medium, 94100, water pump inlet hose
2 medium, 94103, radiator top outlet hose
2 medium, 35x41, cam vent filter assembly to casting
2 small or medium, 22x38, cam vent filter assembly to vent tube
2 small, 94101, carb vacuum hose to brake booster
2 small, 94909, heater core returns to water pump inlet hose
2 small, 94909, heater core central shutoff valve hose
2 small, 94909, heater core manual shutoff valve hose
Best regards,
Ron
Ferrari 330 GT engine s/n 7025
Ferrari 330 GT chassis s/n 6815
Ferrari 330 GT chassis s/n 6815