oval head, straight slot ,metric machine screws
oval head, straight slot ,metric machine screws
I am having a difficult time locating interirior trim screws. The ones I am looking for are used to hold the sun visors, rear view mirror, and inside chrome door latch on a 275gtb. These are not the same as the ones used to hold the leather /vinyl panels which I have found at re-originals. I have looked everywhere.... This same style are on British cars but are not metric. Any help would be appreciated, matt.
-
- Posts: 1206
- Joined: Thu Jan 22, 2004 5:53 pm
Matt,
Try Newco Products in Chatsworth, California. They have many of the
interior fasteners needed for our cars. Check out their site at:
www.newcoproducts.com
They supply to many Ferrari restoration shops as well.
Rudy van Daalen Wetters
1963 GTE s/n 4001
1966 330 GT s/n 8705
Try Newco Products in Chatsworth, California. They have many of the
interior fasteners needed for our cars. Check out their site at:
www.newcoproducts.com
They supply to many Ferrari restoration shops as well.
Rudy van Daalen Wetters
1963 GTE s/n 4001
1966 330 GT s/n 8705
-
- Posts: 151
- Joined: Sat Oct 07, 2006 4:29 pm
- Location: lafayette indiana
I go down this road everyday, Newco has some things no one else seems to carry, however try these suppliers:
Henry's Automotive Warehouse 1-800-239-8149
Restoration Specialties and supply company 814-467-9842
Wurth 1-800-987-7487 or www.wurthusa.com
Richard Garre
Henry's Automotive Warehouse 1-800-239-8149
Restoration Specialties and supply company 814-467-9842
Wurth 1-800-987-7487 or www.wurthusa.com
Richard Garre
-
- Posts: 1908
- Joined: Wed Sep 04, 2002 12:13 am
- Location: San Francisco Area
- David Booth
- Posts: 271
- Joined: Wed Sep 04, 2002 2:23 am
- Location: Vista, California
- Contact:
-
- Posts: 1206
- Joined: Thu Jan 22, 2004 5:53 pm
-
- Posts: 1206
- Joined: Thu Jan 22, 2004 5:53 pm
Reoriginals has helped me quite a bit on some very hard to find items and the quality has always been good. The screws and washers from them are not up to my standards. The ones from restorationstuff are much finer quality. I needed 4 rear tail light lense screws which I purchased from reoriginals for 14 dollars. I could not find them anywhere else, they had them.
-
- Posts: 1908
- Joined: Wed Sep 04, 2002 12:13 am
- Location: San Francisco Area
Yes. They are a good bunch. Susan is especially helpful.matt wrote:Reoriginals has helped me quite a bit on some very hard to find items and the quality has always been good. The screws and washers from them are not up to my standards. The ones from restorationstuff are much finer quality. I needed 4 rear tail light lense screws which I purchased from reoriginals for 14 dollars. I could not find them anywhere else, they had them.
PF Coupe