250 PF Coupe Exhaust

[Greg Brendel]

Tom,

I saw where you just installed an exhaust in a 250 PF. Who supplied the exhaust and at what price? I have heard of Timevalve...

thanks,
Greg

[tyang]

Hi Greg,

I don't know who made the exhaust we recently installed. I made some measurements for Kerry if you want. It's for a series I PF coupe.

Tom

[330GT]

My PF coupe exhaust system/kit just arrived from David Carte.

P1010062.JPG (968 KiB) Viewed 3431 times

PS, anybody need a NOS ANSA exhaust system for a GTE as one came with the coupe.

[330GT]

My PF coupe exhaust system/kit just arrived from David Carte.
PS, anybody need a NOS ANSA exhaust system for a GTE as one came with the coupe.

The GTE system is sold. A couple of more notes. Parker Hall sells Abarth stickers. The older Ferraris use center pull hangers rather than the side pull ones used from the mid-GTE era on. Of course, Parker has those too. As the metal tabs are in the center, the aluminum spacers need to be thicker, 6mm instead of 4mm. I found some 1/4" (6.12mm) thick ones at McMaster-Carr that will work. Slightly larger in diameter, 1/2" (12.27mm) instead of 12mm, but close enough for me, and quite reasonable in price too. They are also available painted for the early 50's cars that use the black hangers. Of course, the car came with a bunch of new side pull hangers that I won't need until the exhaust on the 330 needs replacing.