330 gtc engine complete Pertronix Ignition

Moderators: 330GT, abrent

Post Reply
Joel Benatar
Posts: 34
Joined: Fri Sep 06, 2002 12:56 pm
Location: San Diego California

330 gtc engine complete Pertronix Ignition

Post by Joel Benatar »

At the following sight you can see the end result in the Pertronix Ignition system that i installed in my 330 GTC. I can say from a performance level the car is great. Must remember though I have virtually a brand new engine. Starting is a dream, as is full power acceleration. When you go to the pictures look at picture #96 to see the units.
Thanks
Joel

http://f2.pg.photos.yahoo.com/ph/jbenat ... %26.view=t
abrent
Posts: 129
Joined: Wed Sep 11, 2002 1:50 am

Pertronix

Post by abrent »

Hi,

Well done on getting this to work. How did you do the interuptor, as I understood there was no application from Pertronix for the V12 twin distributor cars.
Which kit('s) did you use?

Regards,

Andrew.
Joel Benatar
Posts: 34
Joined: Fri Sep 06, 2002 12:56 pm
Location: San Diego California

Post by Joel Benatar »

Hi
The actual conversion was done by Pertronix themselves and to my knowledge(a bit limited) Marvin at Pertronix told me that he used 2 six cylinder systems. I told him that I was going to let some of you guys know about this. His phone number is (909) 599-5955. He quoted me $300 per distributor.You might also mention that this order came through Alan Taylor Company of Escondido. Good Luck.
Joel
Post Reply