Front windshield gasket needed 65 330GT 2+2
Front windshield gasket needed 65 330GT 2+2
Tom, any chance you have a front windshield gasket for sale for a 1965 330GT 2+2? Anyone know where one might be found?
1966 330 GT 2+2 Interim series I, 1986 328 GTB, 2005 575M, 1979 308 GTS
Re: Front windshield gasket needed 65 330GT 2+2
If Tom hasnt got one you may want to try reoriginals (details in suppliers page)
400 "30897" " Mondial "45461" & lots of other peoples toys at work
Re: Front windshield gasket needed 65 330GT 2+2
Yes, I have an email into them. They only show the GTC gasket on their website but am hoping they might have one and the site is just not current. Thanks for the recommendation. Kevin
1966 330 GT 2+2 Interim series I, 1986 328 GTB, 2005 575M, 1979 308 GTS
Re: Front windshield gasket needed 65 330GT 2+2
I would normally recommend http://www.cicognaniguarnizioni.it/ (they make most of the seals that you see at re-originals and other places), but they seem to be offline at the moment for inventory.
--Josh
--Josh
Re: Front windshield gasket needed 65 330GT 2+2
Try Lee at T. Rutlands 1-800-638-1444. I paid $285 for a front windsheild gasket in April last year. Their service is great and they stand behind their products.
Installation is tricky. Make sure to leave the gasket out in the sun so it gets good and soft. Mount the gasket to the glass and install the stainless trim. Use dishwashing detergent sparingly and a coil of thin rope inside to set the gasket onto the frame of the car. This is best done by somebody with experience. There is little margin for error and many ways to do it wrong. Hope this helps.
Installation is tricky. Make sure to leave the gasket out in the sun so it gets good and soft. Mount the gasket to the glass and install the stainless trim. Use dishwashing detergent sparingly and a coil of thin rope inside to set the gasket onto the frame of the car. This is best done by somebody with experience. There is little margin for error and many ways to do it wrong. Hope this helps.
1964 330 GT 2+2 (s/n 5839)
1969 Intermeccanica Italia
1969 Intermeccanica Italia
Re: Front windshield gasket needed 65 330GT 2+2
Yep, you were correct, T. Rutland's has it and now one is coming my way. I am going to have the windshield installed by an expert. The new windshield is original OEM and has been in the crate for many, many years. I certainly would not want to crack that one!Benjamin wrote:Try Lee at T. Rutlands 1-800-638-1444. I paid $285 for a front windsheild gasket in April last year. Their service is great and they stand behind their products.
Installation is tricky. Make sure to leave the gasket out in the sun so it gets good and soft. Mount the gasket to the glass and install the stainless trim. Use dishwashing detergent sparingly and a coil of thin rope inside to set the gasket onto the frame of the car. This is best done by somebody with experience. There is little margin for error and many ways to do it wrong. Hope this helps.
Thanks guys. The advice on this site has been quite supportive and helpful.
Kevin
1966 330 GT 2+2 Interim series I, 1986 328 GTB, 2005 575M, 1979 308 GTS