heater help
heater help
I've got all the controls set as per the heater diagram on my 1967 330 GT 2+2 for floor heat, but only get cold air coming . Warm blows out for defrost when controls are moved to defrost. What could be causing the floor vents to not get warm air?
1967 330 GT 2+2 8767
George Davidson
George Davidson
Re: heater help
Perhaps the hose from the heater box isn't attached to the vent hole in the kick panel. Does this happen on both sides?
Regards, Kerry
http://www.330gt.com 330 GT Registry
http://www.parrotbyte.com/kbc/ferrari 250 PF Coupe 1643GT, 330 GT 2+2 8755GT, 308 GTS 23605
http://www.330gt.com 330 GT Registry
http://www.parrotbyte.com/kbc/ferrari 250 PF Coupe 1643GT, 330 GT 2+2 8755GT, 308 GTS 23605
Re: heater help
Sounds like rotted vent hoses to me. If you have the same brain-dead design that I have on my 330 GTS, then all you need to do is to remove the fender guard, and replace the 4" hose.
A word of advice, based on my experience with my heater boxes - when you are in there, resist the temptation to take the system out to overhaul it.
A word of advice, based on my experience with my heater boxes - when you are in there, resist the temptation to take the system out to overhaul it.