Abarth vs.Ansa Exhaust?

Moderators: 330GT, abrent

Post Reply
whturner
Posts: 255
Joined: Sun Sep 26, 2004 10:48 am
Location: Western PA
Contact:

Abarth vs.Ansa Exhaust?

Post by whturner »

Could someone summarize which exhaust system was stock on which cars (excluding of course the competition and special systems)

Cheers
Warren
330 GT Series II sn 10069
Jimmyr
Posts: 447
Joined: Thu Aug 19, 2004 11:20 pm
Location: Scottsdale, AZ

Re: Abarth vs.Ansa Exhaust?

Post by Jimmyr »

Warren, my Lusso 4537, has original the Abarth system. Only the factory data sheets can give a true picture of what was original. Jim
User avatar
330GT
Posts: 1642
Joined: Wed Sep 04, 2002 9:30 am
Location: Seattle, WA
Contact:

Re: Abarth vs.Ansa Exhaust?

Post by 330GT »

In gereral, Ferrari used Abarth until switching to ANSA with the introduction of the GTE.

An old FAF catalog shows ANSA systems for both a 250 SWB and Lusso. Both state that extensive modifications are required to make them fit.

These modifications started with David Seielstad who fit them to his SWB (2243) and Lusso (5223).

When I was looking at fitting the NOS GTE system that came with my PF coupe, I asked David for information. He sent me these pictures:
2.jpg
2.jpg (51.14 KiB) Viewed 3477 times
5.jpg
5.jpg (111.4 KiB) Viewed 3477 times
10.jpg
10.jpg (93.04 KiB) Viewed 3477 times
12.jpg
12.jpg (87.69 KiB) Viewed 3477 times
15.jpg
15.jpg (139.06 KiB) Viewed 3477 times
4.jpg
4.jpg (66.89 KiB) Viewed 3476 times
6.jpg
6.jpg (112.54 KiB) Viewed 3476 times
As you can see, the various new pieces were laid on top or next to the original Abarth Lusso exhaust.

For my coupe, I am getting one made by David Carte that fits the 508D chassis.
Regards, Kerry
http://www.330gt.com 330 GT Registry
http://www.parrotbyte.com/kbc/ferrari 250 PF Coupe 1643GT, 330 GT 2+2 8755GT, 308 GTS 23605
User avatar
tyang
Posts: 4066
Joined: Wed Nov 27, 2002 10:28 pm
Location: New York
Contact:

Re: Abarth vs.Ansa Exhaust?

Post by tyang »

The PF Coupe exhaust (original Abarth) that I'm hanging as we speak (I'm on lunch) hangs differently than the ANSAs I've worked with. Some of the mounts come through the center of the two pipes, as the ANSA use tabs all mounted on the outside. I'm sure that will affect alignment with the car when it's hung.

If I get a chance, I'll take some pictures.

Tom
'63 330 America #5053
Post Reply