Correct Finish - Sway bar and brackets etc
Correct Finish - Sway bar and brackets etc
Can i please get some advise on the proper color finish on the sway bar, sway bar brackets that mount to the frame and the sway bar links?
Looking to send some parts out to powdercoat this week.
Looking to send some parts out to powdercoat this week.
Ed Montini
330 GT 2+2 Series II - 8289
58 Ellena - 0855GT - orig drivetrain
87 El Camino SS
330 GT 2+2 Series II - 8289
58 Ellena - 0855GT - orig drivetrain
87 El Camino SS
-
- Posts: 1910
- Joined: Wed Sep 04, 2002 12:13 am
- Location: San Francisco Area
Re: Correct Finish - Sway bar and brackets etc
Hi Ed,
I am going by the notion that the sway bar and the (rubber bush) loops are satin black and the links are nickel plated.
john
I am going by the notion that the sway bar and the (rubber bush) loops are satin black and the links are nickel plated.
john
PF Coupe
Re: Correct Finish - Sway bar and brackets etc
Where are you lobo and castlenuts hardware John ?
ciao
Cornelis
ciao
Cornelis
-
- Posts: 1910
- Joined: Wed Sep 04, 2002 12:13 am
- Location: San Francisco Area
Re: Correct Finish - Sway bar and brackets etc
Here you go Cornelis. I haven't decided yet as to whther buy replacement (lookalike) lock nuts or have these lock nuts plated. Any thoughts?buurman wrote:Where are you lobo and castlenuts hardware John ?
ciao
Cornelis
john
PF Coupe
Re: Correct Finish - Sway bar and brackets etc
Thanks John, any thoughts on the sway bar brackets that mount to the frame?
Any opinion on the nuts and bolts.....plate them as well? I think the bolts are black oxide as well as the washers. The nuts - are they clear zinc?
Any opinion on the nuts and bolts.....plate them as well? I think the bolts are black oxide as well as the washers. The nuts - are they clear zinc?
Ed Montini
330 GT 2+2 Series II - 8289
58 Ellena - 0855GT - orig drivetrain
87 El Camino SS
330 GT 2+2 Series II - 8289
58 Ellena - 0855GT - orig drivetrain
87 El Camino SS
Re: Correct Finish - Sway bar and brackets etc
John , I can live perfecttly with new selfsecuring nuts.
All the best
Cornelis
All the best
Cornelis
-
- Posts: 1910
- Joined: Wed Sep 04, 2002 12:13 am
- Location: San Francisco Area
Re: Correct Finish - Sway bar and brackets etc
Cornelis, you tend to forget that in America we restore the piss out of our cars.buurman wrote:John , I can live perfecttly with new selfsecuring nuts.
All the best
Cornelis
john
PF Coupe
-
- Posts: 1910
- Joined: Wed Sep 04, 2002 12:13 am
- Location: San Francisco Area
Re: Correct Finish - Sway bar and brackets etc
Hi Ed,enio45 wrote:Thanks John, any thoughts on the sway bar brackets that mount to the frame?
Any opinion on the nuts and bolts.....plate them as well? I think the bolts are black oxide as well as the washers. The nuts - are they clear zinc?
The sway bar brackets (loops) are satin black. The bolts and washers are black oxide and the lock nuts are clear cadmium.
john
PF Coupe
Re: Correct Finish - Sway bar and brackets etc
Thanks again john,
when you send out your bolts, nuts and washers - do you media clean them before the get sent out - or does the plater do this?
when you send out your bolts, nuts and washers - do you media clean them before the get sent out - or does the plater do this?
Ed Montini
330 GT 2+2 Series II - 8289
58 Ellena - 0855GT - orig drivetrain
87 El Camino SS
330 GT 2+2 Series II - 8289
58 Ellena - 0855GT - orig drivetrain
87 El Camino SS
-
- Posts: 1910
- Joined: Wed Sep 04, 2002 12:13 am
- Location: San Francisco Area
Re: Correct Finish - Sway bar and brackets etc
Hi Ed,
I understand most platers will discount for your cleaning of the items.
john
I understand most platers will discount for your cleaning of the items.
john
PF Coupe
Re: Correct Finish - Sway bar and brackets etc
Hi Ed,enio45 wrote:Thanks again john,
when you send out your bolts, nuts and washers - do you media clean them before the get sent out - or does the plater do this?
The cleaner you can get your parts the better. Any grease or residue missed by the $10/hr parts washer at the platers will give you an irregular surface. Some platers do better jobs than others, but we try not to leave things up to chance.
Tom
'63 330 America #5053
Re: Correct Finish - Sway bar and brackets etc
John , i think i would replate the oem fasteners, nuts with yellow nylock. You can add Loctite as you need, when you see the need. The original nuts were made to a different earlier standard. There is less material in modern replacements and they are also roundier, most likely for some safety logic or material reduction.enio45 wrote:Thanks John, any thoughts on the sway bar brackets that mount to the frame? Any opinion on the nuts and bolts.....plate them as well? I think the bolts are black oxide as well as the washers. The nuts - are they clear zinc?
yes, clear zinc on the nuts.
- Attachments
-
- din982bw.jpg (3.13 KiB) Viewed 9626 times
Re: Correct Finish - Sway bar and brackets etc
A correction if i may, clear CADMIUM for the nylock nuts in the mid 60's, not zinc.
Re: Correct Finish - Sway bar and brackets etc
OK, if i may - couple of more plating or painting questions for the front end.
The disc rotor backing plate - looks to me this is painted gloss black?
The spindle area where the control arms mount to and the piece at the top of spindle (has the lower shock mount on it) - this does not look to be plated - maybe just a cast look?
Appreciate the advise........
The disc rotor backing plate - looks to me this is painted gloss black?
The spindle area where the control arms mount to and the piece at the top of spindle (has the lower shock mount on it) - this does not look to be plated - maybe just a cast look?
Appreciate the advise........
Ed Montini
330 GT 2+2 Series II - 8289
58 Ellena - 0855GT - orig drivetrain
87 El Camino SS
330 GT 2+2 Series II - 8289
58 Ellena - 0855GT - orig drivetrain
87 El Camino SS
Re: Correct Finish - Sway bar and brackets etc
Instead of making headachse about nuts and boltsJohn Vardanian wrote:Cornelis, you tend to forget that in America we restore the piss out of our cars.buurman wrote:John , I can live perfecttly with new selfsecuring nuts.
All the best
Cornelis
john
place an 20 mm torsionbar on the front.
your driving handling will improve very strong, If you tread your car in the right way
near the 7000-8000 rpm border.
ciao
Cornelis