does any of you members have these parts and are willing to sell them? the driversside dash trim
(J shaped) and the A pillar trim for both sides?
thanks derf
250 gte interior?
Re: 250 gte interior?
Might be worth mentioning if you are looking for dash trim pressed out of sheetmetal or cast alloy. The A-pillar trim pieces shouldn't be too hard to make. Best wishes, Kare
250 GT 2+2 3197/GT
Re: 250 gte interior?
try Greg Jones..
William
1979 Avanti s/n Rqb-3016
1962 GTE s/n 3447
1960 Alfa Romeo Giulietta Spider 1495*09775
1979 Avanti s/n Rqb-3016
1962 GTE s/n 3447
1960 Alfa Romeo Giulietta Spider 1495*09775
Re: 250 gte interior?
Found diff types of A pillar dash trim in my small stock.derfgte wrote:does any of you members have these parts and are willing to sell them? the driversside dash trim
(J shaped) and the A pillar trim for both sides?
thanks derf
But unsure to which Ferraris they belong.
The red one is for sure PF coupe
Orthers unknown.
If one suits your car you can PM me.
Orthes side is available
But ask the members here first.
To make is a lot easerer here the PF numbers.
In side of part say PFnr 100, 617, (7 written upside down) and 986.
Nice little quiz.
I think Kare have the PF files of those cars
Cornelis
- Attachments
-
- IMG_2531.jpg (46.42 KiB) Viewed 4195 times
-
- IMG_2532.jpg (43.1 KiB) Viewed 4195 times
Re: 250 gte interior?
The grey one towards the center looks like a GTE a pillar trim piece, the grey one on the far right is the trim piece that fits below the right rear side window.
Greg Jones in FL has a bunch of GTE parts that I saw in in January. If you need his contact number, PM me.
Tom
Greg Jones in FL has a bunch of GTE parts that I saw in in January. If you need his contact number, PM me.
Tom
'63 330 America #5053