BORRANI SPARE WHEEL TIE DOWN BOLT

Moderators: 330GT, abrent

Post Reply
Michael Bayer
Posts: 699
Joined: Mon Nov 04, 2002 7:22 am

BORRANI SPARE WHEEL TIE DOWN BOLT

Post by Michael Bayer »

I seem to remember at Richard Garre's someone was looking for one Masserati Part source has them listed, M
Michael J. Bayer
330GT s/n 9727
365GTC4 s/n 14943
Dino Spider s/n 1193
8339
Posts: 128
Joined: Mon Feb 18, 2008 10:44 am
Location: Reisterstown, MD
Contact:

Re: BORRANI SPARE WHEEL TIE DOWN BOLT

Post by 8339 »

Michael, you are correct, Maserati Information Exchange (MIE) does have them for Ghiblis, Indys, etc. What I don't know is the size and thread pitch of the hold down bolt and I'm not sure if the bolt handle matches that of the Ferraris. I'm guessing most of or all of these hold downs came from some local sub contractor nearby.

Richard Garre
Radcliffe Motorcar Co.
250GT
Posts: 968
Joined: Wed Oct 15, 2008 7:41 am
Location: germany/holland

Re: BORRANI SPARE WHEEL TIE DOWN BOLT

Post by 250GT »

I'm guessing most of or all of these hold downs came from some local sub contractor nearby.

Richard Garre
Radcliffe Motorcar Co.[/quote]

No Richard,those were made by Pininfarina work, I do still have some of them in original PF- plasticbags.
Well yes, that can be called a local sub contractor too .
Will send some pics after daily work.

Cornelis

P.S
The Maserati hold downs looks absolutely diff.
But 400 usd is a lot I think.
they are still original available with some research work
250GT
Posts: 968
Joined: Wed Oct 15, 2008 7:41 am
Location: germany/holland

Re: BORRANI SPARE WHEEL TIE DOWN BOLT

Post by 250GT »

8339 wrote:Michael, you are correct, Maserati Information Exchange (MIE) does have them for Ghiblis, Indys, etc. What I don't know is the size and thread pitch of the hold down bolt and I'm not sure if the bolt handle matches that of the Ferraris. I'm guessing most of or all of these hold downs came from some local sub contractor nearby.

Richard Garre
Radcliffe Motorcar Co.

Richard ,
threadpitch(steigung) 1.75 metric of course
there are differant lenght due to "offset" of the Borranis.
the one at Maserati source is a Ferraripart,
her some pics

C.
Attachments
1,75 metric
1,75 metric
IMG_0373.jpg (105.6 KiB) Viewed 5575 times
diff types all Ferrari
diff types all Ferrari
IMG_0372.jpg (83.09 KiB) Viewed 5575 times
diff lenght available
diff lenght available
IMG_0370.jpg (58.04 KiB) Viewed 5575 times
Michael Bayer
Posts: 699
Joined: Mon Nov 04, 2002 7:22 am

Re: BORRANI SPARE WHEEL TIE DOWN BOLT

Post by Michael Bayer »

I thought they looked right By the way I bought a pair (wanted to keep them matching) of inside door handles for my 330 from Shaughnessy they are terrific and FAR stongerthan those &^%$ pot metal originals So I have one good original if someone needs it M
Michael J. Bayer
330GT s/n 9727
365GTC4 s/n 14943
Dino Spider s/n 1193
jcwconsult
Posts: 128
Joined: Wed Jun 02, 2004 11:55 am
Location: Ann Arbor, Michigan

Re: BORRANI SPARE WHEEL TIE DOWN BOLT

Post by jcwconsult »

I also bought a pair of the reproduction inside handles from TS for my 365 GT 2+2. The ends of both of mine were broken and the replacements simultaneously look good and work properly.
Jim Walker
365 GT 2+2 #12451
Post Reply