Gemmun:
Did Ferrari apply the bumpy coating (undercoating?) under the paint of the rocker panels of my 67 330 2+2 when they built it? Or was this done when it was repainted? In other words, is the bumpy finish correct? My painter needs to know. He's getting close
Tom
Rocker Panel Painting
Rocker Panel Painting
Tom Treue
67 330GT 2+2, No. 9129 (former owner)
67 330GT 2+2, No. 9129 (former owner)
Re: Rocker Panel Painting
Hi Tom,
To to the best of my knowledge, no bumpy paint.
Tom
To to the best of my knowledge, no bumpy paint.
Tom
'63 330 America #5053
Re: Rocker Panel Painting
I concur with Tom, no "bumpy" surface on the rocker panels. My 330 had that as well and it must have been painted that way 20 years ago as a rock and chip guard, however to the best of my knowledge it's not correct for the car.
Richard Garre
Radcliffe Motorcar Company
Richard Garre
Radcliffe Motorcar Company
Re: Rocker Panel Painting
No bumpy paint and car color, not black. The metal strip on the pinch weld under the rockers is semi-gloss black through.
Regards, Kerry
http://www.330gt.com 330 GT Registry
http://www.parrotbyte.com/kbc/ferrari 250 PF Coupe 1643GT, 330 GT 2+2 8755GT, 308 GTS 23605
http://www.330gt.com 330 GT Registry
http://www.parrotbyte.com/kbc/ferrari 250 PF Coupe 1643GT, 330 GT 2+2 8755GT, 308 GTS 23605
Re: Rocker Panel Painting
Thanks, guys. Smooth and body color it is. I'll pass that on to my paint shop.
Tom
Tom
Tom Treue
67 330GT 2+2, No. 9129 (former owner)
67 330GT 2+2, No. 9129 (former owner)
Re: Rocker Panel Painting
Hi Kerry,330GT wrote:No bumpy paint and car color, not black. The metal strip on the pinch weld under the rockers is semi-gloss black through.
Speaking of the metal strip, do they have blind screws or are they held in place with oval head phillips machine screws?
Tom
'63 330 America #5053
Re: Rocker Panel Painting
Flat head phillips machine screws on mine (8755). The strip itself is a box with most of the back open. The holes in the strip are countersunk so the screw heads are flush with the surface.tyang wrote:
Hi Kerry,
Speaking of the metal strip, do they have blind screws or are they held in place with oval head phillips machine screws?
Tom
Made of steel, the inside gets packed with dirt, etc., making it rust from the inside. If i were to have to replace these, I would use some 1/4" thick aluminum of the appropriate width. That way, nothing to rust and nowhere for crud to accumulate.
Regards, Kerry
http://www.330gt.com 330 GT Registry
http://www.parrotbyte.com/kbc/ferrari 250 PF Coupe 1643GT, 330 GT 2+2 8755GT, 308 GTS 23605
http://www.330gt.com 330 GT Registry
http://www.parrotbyte.com/kbc/ferrari 250 PF Coupe 1643GT, 330 GT 2+2 8755GT, 308 GTS 23605