330 GTC overflow tank

[enio45]

Jim , thanks for the thoughts....;yes, i do have the correct lower front valance pan. Looks like the stands and the correct overflow tank hold down is missing.

I need to try to locate both items or make them.....anyone with any extra's available?

Also - here is the pic of my 330 GT top strap, and yes agree, it should have the foam insulator in it as well

GTC im working on is #8843

[Jim Wickstead]

Ed,

The strap looks correct. Any indication of rivet hole being filled or otherwise existing in lower body panel? If you cannot get a part, I'd be willing to take my tank assembly apart and provide a drawing of the lower mounting bracket. I don't think having this reproduced would be complicated or overly expensive.

Jim

[enio45]

Jim, thanks for the info - i looked at the gtc today and i can see where someone covered up the rivot holes for the bracket.

Ill get my metal guy to make the bracket - so i would appreciate some basic dimensions for the bracket....will be an easy make - in fact ill have him make 2-3 of them for future use .

Additional pics could help as well. Ill call around to see if anyone has an orig strap avail, if not ill make one of these as well - and hope i can get the raised rib on it too

can u send dimensions to my email edm@montiniaz.com

thank you a million for the help

[Jim Wickstead]

Ed,

I should be able to get this to you over the weekend. Once things are apart I will send additional photos as well as drawings. Glad to help out.

Jim

[enio45]

Thank you.......