Well Folks, I need some assistance:
I finally have an operational master cylinder, the connecting bolts but no banjo fittings.
For my 1964 330GT series I, I need the 4 brake master cylinder banjo fittings. The M/C on this jewel of a machine is located under the floorboard next to the first muffler.
As per TAV 32, the banjos are under No 18, P/N 680052, need 2. These are the large ones and take a 19 mm connecting bolt.
The others also TAV 32 No 19, P/N 94905, also need 2. These are the smaller ones and take a 14 mm connecting bolt.
Any ideas? Please let me know.
Thanks,
Yves
300GT brake M/C banjo fittings
Re: 300GT brake M/C banjo fittings
Picture I tried to send.
Cory
Cory
- Attachments
-
- IMG_20140330_172149_304-1.jpg (112.58 KiB) Viewed 3201 times
Re: 300GT brake M/C banjo fittings
Thank you very much for your assistance, Cory.
PM sent.
PM sent.