Bleeding the brakes on a Daytona

Moderators: 330GT, abrent

Post Reply
Steve Meltzer
Posts: 889
Joined: Mon Sep 06, 2004 10:31 am
Location: with Barney the Beagle boy and Enzo 8995

Bleeding the brakes on a Daytona

Post by Steve Meltzer » Tue Feb 23, 2016 4:37 pm

Finally finished rebuilding all the calipers and replacing all of the hoses on my Daytona Spyder conversion, but really struggled to get the brakes bled. Usually, I use a medical style vacuum, but it was a no go this time. Then I remembered that long ago (and far away) I'd purchased a "Motive" power pressure brake bleeder for my 'Vettes. This thing worked like a charm...all 12 bleeders done in less than 15 minutes. Luckily, the unit came with an adapter that fit the Daytona MC accounting for good fortune. Just a little FYI, for a fast brake bleed, done solo and without the need to keep an eye on the MC's level while working. steve
meltzer, "“With a Ferrari, whatever it is, it’s a $1000. If that’s what it is.”"
'66 330 GTC, '72 Daytona-red, did they make any other colors?

Post Reply