365GT 2+2 Brake rotor specifications?

Moderators: 330GT, abrent

Post Reply
Dan Sands
Posts: 51
Joined: Sun Aug 19, 2007 1:32 pm
Location: Salem, OR

365GT 2+2 Brake rotor specifications?

Post by Dan Sands »

Can someone please tell me the front and rear Minimum/Maximum Brake rotor thickness specification for 365 GT 2+2? I had it years ago, but cannot find it anymore.
Thanks!
Dan
1969 365 GT 2+2
Jumprun
Posts: 276
Joined: Wed Aug 01, 2012 6:28 pm
Contact:

Re: 365GT 2+2 Brake rotor specifications?

Post by Jumprun »

Here's what I have shown below. It's interestng that the second number given is not stated to be absolute minimum, rather it says "minimum after reconditioning" does this mean the actual wear limit is thinner? And what might that be? When I checked my rotors I just used the range given as max. and min.

This info is from the Rush and Aspen tuning and maintainence book.

Front
32mm standard.
30mm min. after reconditioning.

Rear
21mm standard.
19mm min. after reconditioning.
Jumprun
Posts: 276
Joined: Wed Aug 01, 2012 6:28 pm
Contact:

Re: 365GT 2+2 Brake rotor specifications?

Post by Jumprun »

Sorry that should be Roush and Apen, blame the aggressive spell check, it took typing it three times to stop it from trying to think for me.
Dan Sands
Posts: 51
Joined: Sun Aug 19, 2007 1:32 pm
Location: Salem, OR

Re: 365GT 2+2 Brake rotor specifications?

Post by Dan Sands »

Thank you!!!
I spent forever searching to no avail.
Dan
Dan Sands
1969 365 GT 2+2 12629
Post Reply