Hi,
I need to correct a bad repair from the past - does anybody know where to get the gaskets for the front indicator glasses of an 250 GTE or have an idea if gaskets from another car could fit? Please see drawing with the measurements attached.
Thank you, Martin
250 GTE rubber gasket for front indicator glass
250 GTE rubber gasket for front indicator glass
- Attachments
-
- indicator light gasket.jpg (162.86 KiB) Viewed 5638 times
-
- indicator light.jpg (133.16 KiB) Viewed 5638 times
250 GTE #3631 (series Ii)
Re: 250 GTE rubber gasket for front indicator glass
These litle front lamps are identical with Alfa giulietta sprint &cabrio even the Mini did used them.
made by Carello and Altissimo in glas no plastic lenses in the 60th white rubber gasket.
link :
http://www.cicognaniguarnizioni.it/Alfa ... 025252_227
Ciao
C.
made by Carello and Altissimo in glas no plastic lenses in the 60th white rubber gasket.
link :
http://www.cicognaniguarnizioni.it/Alfa ... 025252_227
Ciao
C.
- Attachments
-
- 10025252-600x564-1.jpg (41.01 KiB) Viewed 5611 times
Re: 250 GTE rubber gasket for front indicator glass
THANK YOU VERY MUCH! That´s perfect, I already ordered some other rubber pats too at this seller
250 GTE #3631 (series Ii)
Re: 250 GTE rubber gasket for front indicator glass
Just to inform that no one goes the same wrong road: the rubber gaskets for the front indicator lights purchased from cicognaniguarnizioni.it are wrong. The outer diameter is only 55mm wheras the 250 GTE requires 60mm. Little difference with big effect as the smaller Alfa gaskets do not fit my car
I decided to produce the gaskets myself now and ordered the right tools to do so - probably what I should have done right from the start...
I decided to produce the gaskets myself now and ordered the right tools to do so - probably what I should have done right from the start...
250 GTE #3631 (series Ii)