250 GTE rubber gasket for front indicator glass

Moderators: 330GT, abrent

Post Reply
Melchior
Posts: 149
Joined: Thu May 03, 2018 11:44 am

250 GTE rubber gasket for front indicator glass

Post by Melchior »

Hi,

I need to correct a bad repair from the past - does anybody know where to get the gaskets for the front indicator glasses of an 250 GTE or have an idea if gaskets from another car could fit? Please see drawing with the measurements attached.

Thank you, Martin
Attachments
indicator light gasket.jpg
indicator light gasket.jpg (162.86 KiB) Viewed 5057 times
indicator light.jpg
indicator light.jpg (133.16 KiB) Viewed 5057 times
250 GTE #3631 (series Ii)
250GT
Posts: 968
Joined: Wed Oct 15, 2008 7:41 am
Location: germany/holland

Re: 250 GTE rubber gasket for front indicator glass

Post by 250GT »

These litle front lamps are identical with Alfa giulietta sprint &cabrio even the Mini did used them.

made by Carello and Altissimo in glas no plastic lenses in the 60th white rubber gasket.

link :
http://www.cicognaniguarnizioni.it/Alfa ... 025252_227

Ciao
C.
Attachments
10025252-600x564-1.jpg
10025252-600x564-1.jpg (41.01 KiB) Viewed 5030 times
Melchior
Posts: 149
Joined: Thu May 03, 2018 11:44 am

Re: 250 GTE rubber gasket for front indicator glass

Post by Melchior »

THANK YOU VERY MUCH! That´s perfect, I already ordered some other rubber pats too at this seller :)
250 GTE #3631 (series Ii)
Melchior
Posts: 149
Joined: Thu May 03, 2018 11:44 am

Re: 250 GTE rubber gasket for front indicator glass

Post by Melchior »

Just to inform that no one goes the same wrong road: the rubber gaskets for the front indicator lights purchased from cicognaniguarnizioni.it are wrong. The outer diameter is only 55mm wheras the 250 GTE requires 60mm. Little difference with big effect as the smaller Alfa gaskets do not fit my car :-(

I decided to produce the gaskets myself now and ordered the right tools to do so - probably what I should have done right from the start...
250 GTE #3631 (series Ii)
Post Reply