330 gtc hood support bolts

Moderators: 330GT, abrent

Post Reply
Steve Meltzer
Posts: 866
Joined: Mon Sep 06, 2004 10:31 am
Location: with Barney the Beagle boy and Enzo 8995

330 gtc hood support bolts

Post by Steve Meltzer » Mon Apr 15, 2019 1:06 am

what is the correct finish/color for the bolts that attach the hood hinges, springs, etc on a GTC? ditto the underside of the hood? black semi gloss? thanx. s
steve
meltzer, "“With a Ferrari, whatever it is, it’s a $1000. If that’s what it is.”"
'66 330 GTC, '72 Daytona-red, did they make any other colors?

User avatar
tyang
Posts: 3781
Joined: Wed Nov 27, 2002 10:28 pm
Location: New York
Contact:

Re: 330 gtc hood support bolts

Post by tyang » Thu Apr 18, 2019 7:36 am

Hi Steve,

I usually go with white cad plating, but I've also seen some fasteners in black oxide. Not many fasteners on these cars were painted, unless they were painted over after assembly like steering box bolts.

Tom
'63 330 America #5053

Steve Meltzer
Posts: 866
Joined: Mon Sep 06, 2004 10:31 am
Location: with Barney the Beagle boy and Enzo 8995

Re: 330 gtc hood support bolts

Post by Steve Meltzer » Thu Apr 18, 2019 9:00 am

As always, thanx again. s
steve
meltzer, "“With a Ferrari, whatever it is, it’s a $1000. If that’s what it is.”"
'66 330 GTC, '72 Daytona-red, did they make any other colors?

User avatar
peterp
Posts: 259
Joined: Sun Feb 12, 2006 9:42 am
Location: NJ

Re: 330 gtc hood support bolts

Post by peterp » Thu Apr 18, 2019 10:55 am

It's a bit "apples and oranges", I know, but Kerry's "finishes" page for the 330 GT is a work of art -> http://www.330gt.com/Encyclopedia/Finishes.htm

It always surprises me how many differences there are between the GTC and the GT (or between the series 1 and series 2 GT's for that matter), but I think there are a lot of parallels on finishes. For the the hood support specifically, I would think silver cad also.
Peter P
1966 330 2+2 series 2 #8169

Steve Meltzer
Posts: 866
Joined: Mon Sep 06, 2004 10:31 am
Location: with Barney the Beagle boy and Enzo 8995

Re: 330 gtc hood support bolts

Post by Steve Meltzer » Thu Apr 18, 2019 12:13 pm

thanx Peter....Kerry's work is a treasure...the bible for us. thanx agian.
steve
meltzer, "“With a Ferrari, whatever it is, it’s a $1000. If that’s what it is.”"
'66 330 GTC, '72 Daytona-red, did they make any other colors?

5speed
Posts: 19
Joined: Fri Feb 05, 2010 8:13 pm
Location: St Petersburg,FL

Re: 330 gtc hood support bolts

Post by 5speed » Tue May 07, 2019 1:32 pm

Steve,
The 330 GTC/GTS As Built Manual documents the finish on these bolts. They can be either silver CAD or Black Oxide. The most common found finish is CAD. The 330 GTS/GTC As Built Manual can be down loaded from Ferrari Club Of America web site

Steve Meltzer
Posts: 866
Joined: Mon Sep 06, 2004 10:31 am
Location: with Barney the Beagle boy and Enzo 8995

Re: 330 gtc hood support bolts

Post by Steve Meltzer » Tue May 07, 2019 2:20 pm

not only can it downloaded from the 'net, but if i weren't so ^&%^#^& lazy, i could've looked on my workbench and found it right there. thanx steve
steve
meltzer, "“With a Ferrari, whatever it is, it’s a $1000. If that’s what it is.”"
'66 330 GTC, '72 Daytona-red, did they make any other colors?

Post Reply