Hi All, hi Tom,
my camshafts are marked in two different ways. See picture. One mark is a punch (right in picture) the other a fine line (left in picture). On one camshaft both marks are at the same place, at the other they differ. I guess the thin line is the original factory mark, the punch from a latter timing correction of a workshop. Right? Is the line on the camshaft direct beside the arrow on the valve roller cap the factory mark?
Thanks
Christopher
PS.: clear that I will only use them for basic setting and check/ adjust correct timing afterwards.
Original timing mark camshaft
Re: Original timing mark camshaft
Hi Chris,
The line next to the arrow is where the factory put its timing mark. The dot is someone else's mark.
Tom
The line next to the arrow is where the factory put its timing mark. The dot is someone else's mark.
Tom
'63 330 America #5053