Elektro Board

Moderators: 330GT, abrent

Post Reply
Melchior
Posts: 148
Joined: Thu May 03, 2018 11:44 am

Elektro Board

Post by Melchior »

Hi there, I want to produce a new board for my electric box. It seems that some of the holes were made throughout the years and I hardly know what the original template should look like.

Does anybody have a good picture of an untouched board which I could use as a template?

Regards,

Martin
Attachments
7BEA8905-C4CB-4B05-873C-0CCCBC9511B5.jpeg
250 GTE #3631 (series Ii)
Melchior
Posts: 148
Joined: Thu May 03, 2018 11:44 am

Re: Elektro Board

Post by Melchior »

Forgot to mention - it is the electro board of a 250 GTE
250 GTE #3631 (series Ii)
User avatar
tyang
Posts: 4060
Joined: Wed Nov 27, 2002 10:28 pm
Location: New York
Contact:

Re: Elektro Board

Post by tyang »

I had John Whittington make a new one for a GTE I'm restoring, and I'll try to remember to take a picture of it for you.

Tom
'63 330 America #5053
abrent
Posts: 128
Joined: Wed Sep 11, 2002 1:50 am

Re: Elektro Board

Post by abrent »

I had mine reproduced by a waterjet machine here in Brisbane Australia.
If it helps at all I could ask if another could be made and the cost (I can't recall what I paid)

So we would have the cad file it's just a matter of cutting a few more out.
It was for a SII GTE circa 1962/3

Rgs,

Andrew.
Melchior
Posts: 148
Joined: Thu May 03, 2018 11:44 am

Re: Elektro Board

Post by Melchior »

Hello Andrew,

Thank you very much for your offer, the model is the same then. I bought the Tufnol board from GTO and wait for delivery now. I am not sure whether it is drilled already or if I have to do drill the holes myself. I received a picture of an undamaged board on the meantime which should help. If I would be unable to drill the holes properly for whatever reason, I would contact you if this is ok.

Best regards,

Martin
250 GTE #3631 (series Ii)
Post Reply