Does anyone know of any source for the thin rubber "pad" that is supposed to go under the door sill metal threshold? Picture attached. I have no idea how thick it is supposed to be? 2 or 3mm maybe? I could probably find a sheet the right thickness and cut a pad for each side if I had a clue about it’s thickness.
I've looked at quite a few 330 GTC's, and none of them have this rubber which I'm guessing has simply deteriorated after so many years and as refurbishment has been done, the pad isn’t replaced?. I have looked at a reportedly 100% original, low mileage 330 GTC and it also didn't have this rubber.
But, it should be there, so I'm looking for a source. Any thoughts?
Thanks,
Kevin
photo from the GTC Configuration Guide:
330 GTC - rubber pad under door sill metal threshold
-
- Posts: 44
- Joined: Tue Aug 03, 2021 3:40 pm
- Location: Maryland, USA
330 GTC - rubber pad under door sill metal threshold
1967 330 GTC s/n 9911
Re: 330 GTC - rubber pad under door sill metal threshold
Hi Kevin,
The rubber is very thin, probably 2mm, and I have a rolls of rubber that I use to cut and fit. When I've found the original stuff under the sill, it's usually hardened and cracked.
Tom
The rubber is very thin, probably 2mm, and I have a rolls of rubber that I use to cut and fit. When I've found the original stuff under the sill, it's usually hardened and cracked.
Tom
'63 330 America #5053