Glove box repair

Moderators: 330GT, abrent

Post Reply
Melchior
Posts: 149
Joined: Thu May 03, 2018 11:44 am

Glove box repair

Post by Melchior »

Hello, the bottom of my glove box has been replaced with card board and I need to recreate it from alloy as it was originally. Can anybody send pictures please which show how it should look like - especially at the edges? And was it covered with trim on the underside or shall it be left raw alloy there?

Thank you and best regards,

Martin
Attachments
D2AE85C8-3B22-4874-9930-244C6DAF2896.jpeg
250 GTE #3631 (series Ii)
Dbdavid
Posts: 23
Joined: Fri Sep 14, 2018 6:10 pm

Re: Glove box repair

Post by Dbdavid »

Hi Martin, here is my original glovebox from a Series 1(2677). The outside aluminum was covered in what looks like a black wool material. It still has he Pininfarina body number written in chalk. Below are the pictures. Let me know if you want any more details.
1.jpg
2.jpg
3.jpg
4.jpg
5.jpg
6.jpg
Dave
Dbdavid
Posts: 23
Joined: Fri Sep 14, 2018 6:10 pm

Re: Glove box repair

Post by Dbdavid »

Here are the last 2 pictures of the cloth. Please PM me if you want the full size pictures emailed to you.
7.jpg
8.jpg
Dave
Melchior
Posts: 149
Joined: Thu May 03, 2018 11:44 am

Re: Glove box repair

Post by Melchior »

Hello Dave,

thank you for your beneficiual pictures. I have sent you a pm but could not attach pictures, so I post these here.

Best regards, Martin
Attachments
IMG_9299.JPG
IMG_9302.JPG
IMG_9301.JPG
IMG_9299.JPG
IMG_9295.JPG
250 GTE #3631 (series Ii)
Post Reply