Good morning,
How do you remove this trim piece at the top of the door?
I assumed once you removed the screws that it would lift up and out, but I can't get it to budge.
Thanks
Ron
GTE door trim
-
- Posts: 1910
- Joined: Wed Sep 04, 2002 12:13 am
- Location: San Francisco Area
Re: GTE door trim
Ron, I believe you need to tap upward from the bottom edge. Tape the piece and don't hit it directly; use a block of wood or something semi-hard.
john
john
PF Coupe
Re: GTE door trim
Hi Ron,
It can sometimes be a snug fit. Use a bigger hammer, and be careful. Good luck!
Tom
It can sometimes be a snug fit. Use a bigger hammer, and be careful. Good luck!
Tom
'63 330 America #5053