Page 2 of 2
Re: Knock Off Wheel Torque Wrench Kit
Posted: Fri Apr 26, 2002 11:54 pm
by wwwboard
Posted by Tom
Hi Jim,
Does this picture of Francois' hammer answer your question?
I want to make my own knock off wrench, but I will have to see if it meets Francois' approval!
Tom
Re: Knock Off Wheel Torque Wrench Kit
Posted: Sat Apr 27, 2002 1:10 am
by wwwboard
Posted by Jim
Dear Tom,
Yikes! what a hammer! Looks like it would hurt your arm to use. I have a "pure" lead hammer from Hendrilx Wire Wheel (336-852-8908), which they claim is softer than the usual lead hammers, and therefore, less damaging to the knockoffs. But, I wouldn't expect much less damage with an errant blow to rim or body.
Jim
Re: Knock Off Wheel Torque Wrench Kit
Posted: Sat Apr 27, 2002 1:10 am
by wwwboard
Posted by Jim
Dear Tom,
Yikes! what a hammer! Looks like it would hurt your arm to use. I have a "pure" lead hammer from Hendrilx Wire Wheel (336-852-8908), which they claim is softer than the usual lead hammers, and therefore, less damaging to the knockoffs. But, I wouldn't expect much less damage with an errant blow to rim or body.
Jim
Re: Knock Off Wheel Torque Wrench Kit
Posted: Sat Apr 27, 2002 1:10 am
by wwwboard
Posted by Jim
Dear Tom,
Yikes! what a hammer! Looks like it would hurt your arm to use. I have a "pure" lead hammer from Hendrilx Wire Wheel (336-852-8908), which they claim is softer than the usual lead hammers, and therefore, less damaging to the knockoffs. But, I wouldn't expect much less damage with an errant blow to rim or body.
Jim
Re: Knock Off Wheel Torque Wrench Kit
Posted: Tue Apr 30, 2002 10:44 am
by wwwboard
Posted by John Vardanian
Mark,
I would like to see a picture of your wrench if it's not too much trouble. Thanks.
john
Re: Knock Off Wheel Torque Wrench Kit
Posted: Tue Apr 30, 2002 10:44 am
by wwwboard
Posted by John Vardanian
Mark,
I would like to see a picture of your wrench if it's not too much trouble. Thanks.
john