Arias Pistons

Ferrari Message Board Archive 10/00-8/02
Locked
wwwboard
Posts: 0
Joined: Sun Oct 26, 2008 2:56 pm

Arias Pistons

Post by wwwboard »

Posted by John Hancock

Spent (part of) my May Day surfing the web for parts sources. I came across a reference to Arias pistons for 330, but on the Arias web site I can't find any the right size. Does anyone have any info?

Thanks again, John
wwwboard
Posts: 0
Joined: Sun Oct 26, 2008 2:56 pm

Re: Arias Pistons

Post by wwwboard »

Posted by Kerry

They made the pistons for my 330.  I sent them one of the originals, specifying the same everything, but .020 oversize.  They matched the original identically and the cost was considerably cheaper than oversize pistons from Ferrari (which would have had to be ordered).
So I would talk to them and if necessary, just send them one of the pistons you take out.
My engine rebuild
wwwboard
Posts: 0
Joined: Sun Oct 26, 2008 2:56 pm

Re: Arias Pistons

Post by wwwboard »

Posted by Lee2811

You can also try Venolia for your pistons. Part #10451, $929 a set.

Good Luck.
wwwboard
Posts: 0
Joined: Sun Oct 26, 2008 2:56 pm

Re: Arias Pistons

Post by wwwboard »

Posted by tim

Did exactly the same on mine.  Turn around time was good and price was about $75 each when done in multiples of 4 (no problem) but this price was some time ago.      tim
wwwboard
Posts: 0
Joined: Sun Oct 26, 2008 2:56 pm

Re: Arias Pistons

Post by wwwboard »

Posted by tim

Did exactly the same on mine.  Turn around time was good and price was about $75 each when done in multiples of 4 (no problem) but this price was some time ago.      tim
Locked