Plugs and Covers for 250 GE

Ferrari Message Board Archive 10/00-8/02
Locked
wwwboard
Posts: 0
Joined: Sun Oct 26, 2008 2:56 pm

Plugs and Covers for 250 GE

Post by wwwboard »

Posted by Tom Wilson

Anybody have a source for the chrome plugs for the jack holes?  How about the covers for the hole in the metal panel on the inside of the door, where the window motor goes.  I don't even know what those look like.
wwwboard
Posts: 0
Joined: Sun Oct 26, 2008 2:56 pm

Re: Plugs and Covers for 250 GE

Post by wwwboard »

Posted by Kerry

Luke, I don't know if the window plugs are like those in my 330 GT, but here's how I made a set for my car.

The jack plugs were common on lots of 60s cars and have reproductions made.  So check the usual suspects (McCann, PartSource, etc.).  One thing, once you have them, safety wire them in place so you don't lose one from vibration.
Window Crank Plugs
wwwboard
Posts: 0
Joined: Sun Oct 26, 2008 2:56 pm

Re: Plugs and Covers for 250 GE

Post by wwwboard »

Posted by Tom Wilson

My car has the window crank hole in the chrome panel, which appears to be larger than the panel on your 330.  I have been told that the plug is rectangular.
wwwboard
Posts: 0
Joined: Sun Oct 26, 2008 2:56 pm

Re: Plugs and Covers for 250 GE

Post by wwwboard »

Posted by Tom Wilson

My car has the window crank hole in the chrome panel, which appears to be larger than the panel on your 330.  I have been told that the plug is rectangular.
wwwboard
Posts: 0
Joined: Sun Oct 26, 2008 2:56 pm

Re: Plugs and Covers for 250 GE

Post by wwwboard »

Posted by Tom Yang

Hi Tom,

The plugs for the GTE are different than the ones on a 330 GT 2+2. They're chromed steel pieces that are square. I'll see if I can get you a photo of one.

Tom
wwwboard
Posts: 0
Joined: Sun Oct 26, 2008 2:56 pm

Re: Plugs and Covers for 250 GE

Post by wwwboard »

Posted by Tom Yang

Hi Tom,

The plugs for the GTE are different than the ones on a 330 GT 2+2. They're chromed steel pieces that are square. I'll see if I can get you a photo of one.

Tom
wwwboard
Posts: 0
Joined: Sun Oct 26, 2008 2:56 pm

Re: Plugs and Covers for 250 GE

Post by wwwboard »

Posted by Tom Yang

Hi Tom,

The plugs for the GTE are different than the ones on a 330 GT 2+2. They're chromed steel pieces that are square. I'll see if I can get you a photo of one.

Tom
wwwboard
Posts: 0
Joined: Sun Oct 26, 2008 2:56 pm

Re: Plugs and Covers for 250 GE

Post by wwwboard »

Posted by Tom



Here's a picture of Scott Garvey's GTE. &nbsp
wwwboard
Posts: 0
Joined: Sun Oct 26, 2008 2:56 pm

Re: Plugs and Covers for 250 GE

Post by wwwboard »

Posted by Tom



Here's a picture of Scott Garvey's GTE. &nbsp
wwwboard
Posts: 0
Joined: Sun Oct 26, 2008 2:56 pm

Re: Plugs and Covers for 250 GE

Post by wwwboard »

Posted by Tom



Here's a picture of Scott Garvey's GTE. &nbsp
Locked