a new project begins

jcwconsult · Post by **jcwconsult** » Wed Oct 24, 2007 12:54 pm

I talked to Tom recently and he is OK, though the fires are not far away. He says the TV coverage doesn't really show the extent of the tragedies.

T308 · Post by **T308** » Thu Oct 25, 2007 1:07 am

zac wrote:Not to turn this into a F-Chat style post but I have 2043 as pale blue metallic( azzuro hyperion similar to my car) with red interior. I believe it is still in that color combo.

Not to reopen the 2043/2169 debate, but I was going thru Tom Wilson's site and found an article on 2043 as it is today. Enjoy, I did, I love the early GTEs!

http://ferrari250gte.com/i/2000_files/2 ... Viseur.pdf

Art S. · Post by **Art S.** » Thu Oct 25, 2007 10:15 am

T308,

Great pictures, but I don't read French. What's the story? The car looks to be in a similar cosmetic condition to mine.

Regards,

Art S.

zac · Post by **zac** » Sat Apr 18, 2009 5:26 pm

long time no post, car is finally back on the front burner.

Rudy van Daalen Wetters · Sat Apr 18, 2009 5:42 pm

Love that Fiat 600!

Rudy van Daalen Wetters
1963 GTE s/n 4001
1966 330 GT s/n 8705

zac · Post by **zac** » Sat Apr 18, 2009 5:50 pm

hey Rudy, that's my baby hands off

Rudy van Daalen Wetters · Sat Apr 18, 2009 7:41 pm

Zac,

That baby is so hot!

Rudy van Daalen Wetters
1963 GTE s/n 4001
1966 330 GT s/n 8705

Tom Wilson · Post by **Tom Wilson** » Sat Apr 18, 2009 8:33 pm

Old project, new shop... where are you?

zac · Post by **zac** » Sat Apr 18, 2009 10:16 pm

Yes old project, although 3 years isn't that bad considering where started. Still in Oceanside just closer to the beach on Coast Highway. Hey by the way Tom Wilson I still have your Pen and notebook, set aside for safe keeping I know you said the pen was important to you

Tom Wilson · Post by **Tom Wilson** » Sat Apr 18, 2009 11:10 pm

Great! Do you still need a belly pan to replicate? Or anything else for that matter?

Racerrad · Post by **Racerrad** » Mon Apr 20, 2009 6:44 pm

That is a great looking interior. May I ask who did this?

Thanks, Rad

zac · Post by **zac** » Thu Apr 23, 2009 10:35 am

Hi Tom,

yes I could really use the Belly Pan to copy, that be very helpfull. If no the physical copy I could use some pictures so we can make a new one. Also can someone take a picture of the trim piece that goes on the back lip of the trunk seal flange, I never had on and as we were putting the car together I am noticing some sxtra hole that it mounted to.

Thomas at Symbolic motors did the interior, not cheap but he does good work and you get what you pay for I guess.

I noticed the links to the old photos no longer work, is there any way for me to update them so they remain for refference?

Zac

Tom Wilson · Post by **Tom Wilson** » Thu Apr 23, 2009 11:17 am

No problem, I can get it to you. I will also take a look at the trunk.

AndrewW-G · Post by **AndrewW-G** » Sun Apr 26, 2009 9:12 am

Hi Zac,

you'll need to recode the photo tags, like this (replace the *'s with I's) or in photobucket their is an IMG option - just copy the code and paste straight onto the reply box on here

[*mg]http://i36.photobucket.com/albums/e38/d ... ainted.jpg[/*mg] will give you

Post by **tyang** » Sun Apr 26, 2009 9:47 am

Hi Zac,

I took a look at my archives and found this picture:

Hope this helps. The top piece goes down my the trunk latch.

Do you need the pan that covers the radiator? I'm having one made and the fabricator made fiberglass molds to hammer out the aluminum pieces, and can have them make another one.

Tom

www.tomyang.net

a new project begins

Re: a new project begins

Re: a new project begins

Re: a new project begins

Re: a new project begins

Re: a new project begins

Re: a new project begins

Re: a new project begins

Re: a new project begins

Re: a new project begins

Re: a new project begins

Re: a new project begins

Re: a new project begins