Looking for 2 aux venturis for 40 DCL6 carbs
-
- Posts: 86
- Joined: Wed Jan 29, 2003 10:39 pm
Looking for 2 aux venturis for 40 DCL6 carbs
Hi Guys,
Any leads on finding 2 auxiliary venturis for 40 DCL6 carbs? Have tried Pierce Manifold with no luck. Needed for 1961 250 PF Cab.
Thanks in advance for any help.
Greg
Any leads on finding 2 auxiliary venturis for 40 DCL6 carbs? Have tried Pierce Manifold with no luck. Needed for 1961 250 PF Cab.
Thanks in advance for any help.
Greg
Re: Looking for 2 aux venturis for 40 DCL6 carbs
[quote="Greg Brendel"]Hi Guys,
Any leads on finding 2 auxiliary venturis for 40 DCL6 carbs? Have tried Pierce Manifold with no luck. Needed for 1961 250 PF Cab.
Thanks in advance for any help.
Greg[
I will be in Italy this weekend 19th ,20th, 21th, could ask my Weberman.
He took the whole old stock after closing.
do you mean nr 73?
this part can have overlenght.
Do you need nr 72 round body too?
Cornelis
are you"dallasgreg" on ebay ?
Any leads on finding 2 auxiliary venturis for 40 DCL6 carbs? Have tried Pierce Manifold with no luck. Needed for 1961 250 PF Cab.
Thanks in advance for any help.
Greg[
I will be in Italy this weekend 19th ,20th, 21th, could ask my Weberman.
He took the whole old stock after closing.
do you mean nr 73?
this part can have overlenght.
Do you need nr 72 round body too?
Cornelis
are you"dallasgreg" on ebay ?
- Attachments
-
- 40DCZ.gif (164.05 KiB) Viewed 12171 times
-
- Posts: 86
- Joined: Wed Jan 29, 2003 10:39 pm
Re: Looking for 2 aux venturis for 40 DCL6 carbs
Thanks for the reply Cornelis,
Only need #73 the secondary venture. #72 the choke is ok. Below is a pic. Yes that is me dallasgreg on ebay. I will send you an email separately.
If your Weber contact can help that would be great.
Greg
Only need #73 the secondary venture. #72 the choke is ok. Below is a pic. Yes that is me dallasgreg on ebay. I will send you an email separately.
If your Weber contact can help that would be great.
Greg
- Attachments
-
- venturi.jpeg (71.6 KiB) Viewed 12148 times
Re: Looking for 2 aux venturis for 40 DCL6 carbs
Could you make one from a 40DCO aux venturi? On the DCO the outside is a ring, if you turn down the od to match the od of yours and then cut the ring off so the ends are square like yours you get a workable solution although I would recommend replacing all 6 of then so you are sure each carb will act the same. The aux venturi for the DCO appears to be available at Pierce.
Cheers Jim
Cheers Jim
-
- Posts: 1908
- Joined: Wed Sep 04, 2002 12:13 am
- Location: San Francisco Area
Re: Looking for 2 aux venturis for 40 DCL6 carbs
If worse comes to worst, one can replicate this from other material, like brass.
john
john
PF Coupe
Re: Looking for 2 aux venturis for 40 DCL6 carbs
I found a place in the UK that had parts for my 40 DCL carbs that Pierce didn't have. I'll look up their name when I get home in a week.
Regards, Kerry
http://www.330gt.com 330 GT Registry
http://www.parrotbyte.com/kbc/ferrari 250 PF Coupe 1643GT, 330 GT 2+2 8755GT, 308 GTS 23605
http://www.330gt.com 330 GT Registry
http://www.parrotbyte.com/kbc/ferrari 250 PF Coupe 1643GT, 330 GT 2+2 8755GT, 308 GTS 23605
Re: Looking for 2 aux venturis for 40 DCL6 carbs
Can somebody conform if the chokes below from my stock are correct for Weber 40-dcl-6 ?
see number 38-27 on body.
it would help me to find the correct ventures sizes for these carbs.
thanks
see below
C.
see number 38-27 on body.
it would help me to find the correct ventures sizes for these carbs.
thanks
see below
C.
- Attachments
-
- IMG_0889.jpg (86.97 KiB) Viewed 12072 times
Re: Looking for 2 aux venturis for 40 DCL6 carbs
Cornelis: I believe you have the correct Chokes for 40 DCL 6 carbs. Street engines with Tipo 128 cams used 27 mm Chokes, while Comp engines with Tipo 130 cams used 32 mm Chokes.
-
- Posts: 86
- Joined: Wed Jan 29, 2003 10:39 pm
Re: Looking for 2 aux venturis for 40 DCL6 carbs
The choke is a 33-27. Thanks for all the help! These hopefully will be the last little bits that are keeping he car from running.
Greg
Greg
Re: Looking for 2 aux venturis for 40 DCL6 carbs
Back from a little trip from Turino (IT)
I went there to pick up a set of 1958 36DCL3 carbs of mine
after we came in the old Weberman was a little in panic work 35 years for Weber
he was searching for his glasses for one hour !
but i could helpt him
i needed also some other small stuff for 36DCS (GTE,Lusso)
with glasses he went directly in his librarycatolog office and came back in 5 min with all the needed parts !
incredible if you could see all this 100 million small chaotic pard shop( not Ferrariparts only of course)
I took a pic of the page of mine 36DCL side
Greg, your parts are on the left side ( venturis n.o.s )
will go out after X-mas will send PM
NICE DAYS
C.
I went there to pick up a set of 1958 36DCL3 carbs of mine
after we came in the old Weberman was a little in panic work 35 years for Weber
he was searching for his glasses for one hour !
but i could helpt him
i needed also some other small stuff for 36DCS (GTE,Lusso)
with glasses he went directly in his librarycatolog office and came back in 5 min with all the needed parts !
incredible if you could see all this 100 million small chaotic pard shop( not Ferrariparts only of course)
I took a pic of the page of mine 36DCL side
Greg, your parts are on the left side ( venturis n.o.s )
will go out after X-mas will send PM
NICE DAYS
C.
- Attachments
-
- IMG_0912.jpg (168.6 KiB) Viewed 11971 times
-
- IMG_0916.jpg (84.16 KiB) Viewed 11971 times
-
- IMG_0903.jpg (186.7 KiB) Viewed 11971 times
Re: Looking for 2 aux venturis for 40 DCL6 carbs
Only 3 pics possible
C.
C.
- Attachments
-
- GREG´S PARTS LEFTSIDE 2PIECES
- IMG_0933.jpg (105.83 KiB) Viewed 11971 times
-
- Posts: 86
- Joined: Wed Jan 29, 2003 10:39 pm
Re: Looking for 2 aux venturis for 40 DCL6 carbs
Cornelis,
Thanks for the help! Interesting story with the Weber man able to find a needle in a haystack of all of those little parts but not his glasses. What a wealth of knowledge he has that is irreplaceable.
Greg
Thanks for the help! Interesting story with the Weber man able to find a needle in a haystack of all of those little parts but not his glasses. What a wealth of knowledge he has that is irreplaceable.
Greg
-
- Posts: 1908
- Joined: Wed Sep 04, 2002 12:13 am
- Location: San Francisco Area
Re: Looking for 2 aux venturis for 40 DCL6 carbs
Hi Cornelis, do you think the Weberman might have the sector gears? I had the hardest time finding them and when I finally did the place had only two left.
john
john
PF Coupe
Re: Looking for 2 aux venturis for 40 DCL6 carbs
Hello John,John Vardanian wrote:Hi Cornelis, do you think the Weberman might have the sector gears? I had the hardest time finding them and when I finally did the place had only two left.
john
Guglielmo- around 75years- my Weber man is old school.
Means he has No fax, No bankaccount, No internet side or SMS possibilities.
So I only can make an appointment in Turino at his place.
I will be there again in april 2015, I left again some work for him.
Must have exact info with dimensions if possible.
he produced valves ,axles etc him self all by hands.
those older people must work till they die ,no social cover after 65th birthday.
as Greg said these knowledge will be lost for ever in the future.
C.
-
- Posts: 1908
- Joined: Wed Sep 04, 2002 12:13 am
- Location: San Francisco Area
Re: Looking for 2 aux venturis for 40 DCL6 carbs
Thanks Cornelis. It's sad, but it's the reality.
john
john
PF Coupe