OK, just finished the fill of my Daytona's transaxle. Used the Castrol 75-90 Syntrax + 4 oz (??cc) of the Redline additive. Piece of cake with the fluid transfer unit I got for $9.03, included free shipping, from Amazon.
Here's the link. Well worth it. http://www.amazon.com/gp/product/B00825 ... UTF8&psc=1
ADD: in the interest of full disclosure, I own 2.5 million shares of AMZN.
steve
Transmission and Differential Oil
-
- Posts: 997
- Joined: Mon Sep 06, 2004 10:31 am
- Location: with Barney the Beagle boy and Enzo 8995
Re: Transmission and Differential Oil
steve meltzer,
"I've spent all of my money on wine, a beautiful woman, and stunning cars. Then, squandered the rest."
"I've spent all of my money on wine, a beautiful woman, and stunning cars. Then, squandered the rest."
Re: Transmission and Differential Oil
Oldest trick in the book Steve. I've seen it a million times -- buy 2.5 million shares of Amazon stock, pimp their products on TomYang.net, then dump the stock when the transmission oil buying frenzy is over.Steve Meltzer wrote:ADD: in the interest of full disclosure, I own 2.5 million shares of AMZN.
Peter P
1966 330 2+2 series 2 #8169
1966 330 2+2 series 2 #8169
Re: Transmission and Differential Oil
I understand that modern synthetic gear oil does not need the GM limited slip additive.
Correct me if I am wrong since I use synthetic without the additive - which I have sitting on the shelf from a long time ago. I do know my limited slip works since I have driven on slippery surfaces, and both wheels spin.
Cheers
Warren
Correct me if I am wrong since I use synthetic without the additive - which I have sitting on the shelf from a long time ago. I do know my limited slip works since I have driven on slippery surfaces, and both wheels spin.
Cheers
Warren
330 GT Series II sn 10069
Re: Transmission and Differential Oil
Warren: Actually, the LSD Additive helps the unit "slip". Without the additive, the LSD works too well and you will get chattering as the clutch plates try to grab each other when the car is turning a corner. The additive (which used to be made with whale oil) helps lubricate the plates to promote slippage under normal conditions. When the speed of one wheel exceeds the other wheel by a predetermined amount, the clutches "bite" and limit the wheelspin. I have always added the additive to synthetic gear oils. I view it as cheap insurance. Many gear oils will work in LSD units as a "top up". However, on a full oil change, I always recommend using the additive.
Re: Transmission and Differential Oil
Dyke -- is there a particular brand of LSD additive that you recommend and how much should be added?DWR46 wrote:Warren: Actually, the LSD Additive helps the unit "slip". Without the additive, the LSD works too well and you will get chattering as the clutch plates try to grab each other when the car is turning a corner. The additive (which used to be made with whale oil) helps lubricate the plates to promote slippage under normal conditions. When the speed of one wheel exceeds the other wheel by a predetermined amount, the clutches "bite" and limit the wheelspin. I have always added the additive to synthetic gear oils. I view it as cheap insurance. Many gear oils will work in LSD units as a "top up". However, on a full oil change, I always recommend using the additive.
Regards,
Peter
Peter P
1966 330 2+2 series 2 #8169
1966 330 2+2 series 2 #8169
Re: Transmission and Differential Oil
Is there any danger from not using the additive? Or side effects from using it if not needed? We all know the saying "if it ain't broke, don't fix it"
I have not experienced any chatter in my 330 GT although I had on a couple of previous vehicles. but I wasn't using synthetic either.
Cheers
Warren
I have not experienced any chatter in my 330 GT although I had on a couple of previous vehicles. but I wasn't using synthetic either.
Cheers
Warren
330 GT Series II sn 10069
Re: Transmission and Differential Oil
Peter: For years, the best additive was the GM stuff at the dealers. However, now that whale oil is a banned substance, there are numerous brands available that will work well. Just buy it from a reputable auto parts store.
Whturner: Your 330GT has a ZF unit in it.They do not use "clutches", but rather a set of "chicklets" that wedge into a drum to lock the axles. Technically, it does not need the additive. It does no harm to use it, and may promote better lubrication.
Whturner: Your 330GT has a ZF unit in it.They do not use "clutches", but rather a set of "chicklets" that wedge into a drum to lock the axles. Technically, it does not need the additive. It does no harm to use it, and may promote better lubrication.
- michaelbalk330
- Posts: 130
- Joined: Fri Feb 06, 2015 8:28 am
Re: Transmission and Differential Oil
Today I fixed my leaky pinion seal. After removing the driveshaft and having it balanced, I pulled the u joint. Used an impact hammer to remove the nut and washer and a gear puller removed the flange easily. The books stated it was a 42x72x10 seal, but mine was a 44x60x10. Tom had wisely recommended pulling it first before purchasing!
Installation was easy and I used a little RTV sealer on back of the washer. Installation is simply the reverse.
I used Penrite 250 oil and LSD additive. Whats great about the bottles is they have a built in nozzle- see pic- so no drips while putting it into the housing.
The car is like a different car. First, there are no leaks- check out the pics after a drive- not a drop of oil. In one of the pics you see the right muffler void of its paint from centrifugal force and chronic oil spattering on it. Second, the driveshaft vibration is gone- over the years, people had soldered lead onto different parts of the shaft. When I had it computer balanced, the machine said remove all that stuff, and simply add one small weight opposite some remaining lead on the flange. Third, the thicker oil makes for a much quite rear differential.
Bottom line- I highly recommend the 250 wt oil- i do think there will be less leaks, and I am very happy with the result. Just a few hours total work.
A few hints- use punch and alignment tools to help guide the Flex disc bolts in, clean them all really well first. Dont put in too much grease when you pump it in the yoke- just a few squirts. and grease the mushroom fitting at the front.
Installation was easy and I used a little RTV sealer on back of the washer. Installation is simply the reverse.
I used Penrite 250 oil and LSD additive. Whats great about the bottles is they have a built in nozzle- see pic- so no drips while putting it into the housing.
The car is like a different car. First, there are no leaks- check out the pics after a drive- not a drop of oil. In one of the pics you see the right muffler void of its paint from centrifugal force and chronic oil spattering on it. Second, the driveshaft vibration is gone- over the years, people had soldered lead onto different parts of the shaft. When I had it computer balanced, the machine said remove all that stuff, and simply add one small weight opposite some remaining lead on the flange. Third, the thicker oil makes for a much quite rear differential.
Bottom line- I highly recommend the 250 wt oil- i do think there will be less leaks, and I am very happy with the result. Just a few hours total work.
A few hints- use punch and alignment tools to help guide the Flex disc bolts in, clean them all really well first. Dont put in too much grease when you pump it in the yoke- just a few squirts. and grease the mushroom fitting at the front.
- Attachments
-
- pulling the flange
- P1080827.jpg (120.44 KiB) Viewed 11699 times
-
- penrite 250 lid
- IMG_2133.jpg (116.18 KiB) Viewed 11699 times
-
- dry seal
- IMG_2130.jpg (165.97 KiB) Viewed 11699 times
Michael
1967 330GT #9693
1960 190SL
1967 Ducati 350 Sebring #04783
1959 Moto Guzzi Galletto #GNR93
1973 450SL
1988 Mercedes 300CE 5 spd
1967 330GT #9693
1960 190SL
1967 Ducati 350 Sebring #04783
1959 Moto Guzzi Galletto #GNR93
1973 450SL
1988 Mercedes 300CE 5 spd